JVC KW-V40BT Instruction Manual - Page 51
Connection
View all JVC KW-V40BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
CONNECTION/INSTALLATION Connection R Connecting wires to terminals See pag 52. USB terminal: See page 52. See page 53.*1 Connect the antenna cord to the antenna terminal. REVERSE Purple with white stripe GEAR SIGNAL (Reverse sensor wire) PARKING Light green BRAKE (Parking sensor wire) 10 A fuse Connect SiriusXM Connect Vehicle Tuner (commercially available).*2 (Page 52) Connect to the vehicle's reverse lamp harness when using the optional rear view camera. Connect to the vehicle's parking 3 brake detection switch harness. • For best safety, be sure to connect the parking sensor. 1 White ª / White with black stripe · : To front speaker (left) Gray ª / Gray with black stripe · : To front speaker (right) Green ª / Green with black stripe · : To rear speaker (left) *1 Only for KW-V40BT/KW-V20BT/KW-V200BT. *2 Only for KW-V40BT Region 1/KW-V20BT Region 1/KW-V200BT/ KW-V10 Region 1/KW-V100. *3 If no connections are made, do not let the cable come out from the tab. Purple ª / Purple with black stripe · : To rear speaker (right) Blue (Power antenna wire) *3 (POWER ANTENNA) To automatic antenna if any (250 mA max.) Blue with white stripe (Remote output wire) (REMOTE OUTPUT) To the remote lead of other equipment (200 mA max.) Light blue with yellow stripe (Steering remote control wire) (STEERING WHEEL REMOTE) To the OE remote adapter matching your car Orange with white stripe (Dimmer control wire) Red (Ignition wire) Yellow (Battery wire) Black (Ground wire) (ILLUMI) To car light control switch (ACC) (BATT) (GND) To car chassis Ignition key switch Fuse box Battery ENGLISH 51