JVC KW-V640BT Instruction Manual America - Page 42

Setting the speakers and crossover, frequency, <Speaker/X'over&gt

Get JVC KW-V640BT PDF manuals and user guides View all JVC KW-V640BT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

Settings , select the appropriate crossover network mode according to the speaker system (2-way speaker system or 3-way speaker system). 1 Turn off the AV source. On the Home screen, touch as follows: Then, on the source/option selection screen, touch [AV Off]. 2 Display the screen. 3 Select the speaker type (1), then adjust the crossover frequency (2) of the selected speaker. X'over Front Rear Subwoofer HPF FREQ 100 Hz Slope -6 dB/Oct Gain 0 dB TW Gain -1 dB • Adjustable items vary depending on the selected speaker type/speaker size/crossover settings. Adjusts the crossover frequency for the front or rear speakers (high pass filter). Adjusts the crossover frequency for the speaker (low pass filter). Adjusts the crossover slope. Adjusts the output volume of the selected speaker. Adjusts the output volume of the tweeter. Selects the phase for the speaker. * Speaker location selection is available only when

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
40
ENGLISH
Settings
Settings
Setting the speakers and crossover
frequency
1
Select a car type (
1
), select a speaker
(
2
) (front speakers, rear speakers, or
subwoofer) to set, then location* and
speaker/tweeter size (
3
) of the selected
speaker.
A selection window appears for each setting. Select
an item, then touch
[Close]
to close the window.
Comfort
4 inch
Car Type
Speaker
Door
Location
Medium
Tweeter
X’over
Speaker Select
• Repeat steps
2
and
3
to set all speakers.
• Adjustable items vary depending on the selected
speaker type.
• When a speaker is not connected, select
[None]
.
• When setting the front speakers, also select the
speaker size for
<Tweeter>
.
2
Touch [X’over] to display the <X’over>
screen.
3
Select the speaker type (
1
), then adjust
the crossover frequency (
2
) of the
selected speaker.
X’over
100 Hz
HPF FREQ
-6 dB/Oct
Slope
0 dB
Gain
-1 dB
TW Gain
Subwoofer
Rear
Front
• Adjustable items vary depending on the selected
speaker type/speaker size/crossover settings.
<HPF FREQ>
Adjusts the crossover frequency for the front or rear
speakers (high pass filter).
<LPF FREQ>
Adjusts the crossover frequency for the speaker
(low pass filter).
<Slope>
Adjusts the crossover slope.
<Gain>
Adjusts the output volume of the selected speaker.
<TW Gain>
Adjusts the output volume of the tweeter.
<Phase Inversion>
Selects the phase for the speaker.
* Speaker location selection is available only when <X’over
Network> is set to [2way].
<Speaker/X’over>
Preparation:
Before making the adjustment for
<Speaker/X’over>
,
select the appropriate crossover network mode
according to the speaker system (2-way speaker
system or 3-way speaker system).
1
Turn off the AV source.
On the Home screen, touch as follows:
Then, on the source/option selection screen, touch
[AV Off]
.
2
Display the <X’over Network> screen.
On the monitor panel, press the following buttons
at the same time:
3
Select the crossover network mode.
[2way]
Select this when 2-way system
speakers are used (front/rear).
[3way]
Select this when 3-way system
speakers are used (tweeter/mid
range/woofer).
A confirmation message appears. Touch
[Yes]
.