JVC KW-V640BT Instruction Manual America - Page 55
Wiring connection
View all JVC KW-V640BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Installation and Connection Wiring connection *1 *2 « *2 STEERING REMOTE " Gray/Red ST REMOTE GND Bright green/Red Input 1 Purple/Red Input 2 Connect to your vehicle's steering remote harness. Contact your JVC dealer for details. Connect the antenna cord to the antenna terminal. *1 ¥ 10 A fuse Purple with white stripe Light green White ] / White with black stripe [ Gray ] / Gray with black stripe [ Green ] / Green with black stripe [ Purple ] / Purple with black stripe [ Orange with white stripe USB input terminal (1 m) REVERSE To the car's reverse lamp harness when using the optional rear view camera To the car's parking brake detection switch harness PRK SW Extension wire ( ø ) (For best safety, be sure to connect the parking sensor.) To front speakers/mid range speakers*3 (left) To front speakers/mid range speakers*3 (right) To rear speakers/tweeters*3 (left) To rear speakers/tweeters*3 (right) To the car light control switch *1 Only for KW-V640BT Region 1. *2 Only for KW-V640BT Region 4. *3 For 3-way speaker system connection, see page 54. Light blue with yellow stripe STEERING WHEEL REMOTE INPUT REMOTE CONT To the OE remote adapter (not supplied) which is compatible with your car Blue with white stripe (12 V 350 mA) Red (Ignition wire) ANT.CONT P.CONT To the power control terminal when using the optional power amplifier (Or) To the control terminal of the motor antenna or to the power terminal for the booster amplifier of film-type antenna Yellow (Battery wire) Black (Ground wire) Ignition key switch To the car chassis Car fuse Car battery ENGLISH 53