JVC KWAVX800 Instructions - Page 24

ENGLISH Enjoying surround sounds 4 You can enjoy multi-channel surround playback through the front, center, surround speakers. • After connecting the center speaker, make sure to activate the center speaker; otherwise, no sound comes out of the center speaker ( page 57). • Surround mode can also be used for "USB" and "SD." MULTI: For multi-channel encoded sources such as Dolby Digital*1, DTS*2, and DVD Audio. (When activated, "MULTI" is shown on the source information screen.) Dolby Pro Logic II (Movie/Music): For 2 channel sources except for DivX/MPEG1/MPEG2 discs. To turn on the surround... 1 • You can also use AV MENU on the monitor panel. 2 • Auto: When multi-channel digital signals come in, "MULTI" surround is activated. When 2-channel or 2.1-channel signals come in, "4CH STEREO" is activated. • Through: All incoming channel signals are sent to the corresponding speakers. • Dolby PL II Movie: Activates Dolby Pro Logic II Movie. • Dolby PL IIMusic: Activates Dolby Pro Logic IIMusic. You can adjust and setting ( below). Only when selecting After step 4 above... 3 1 Activate . • Off: Deactivates surround. • On: Activates surround = go to the following steps. • Panorama: Select to add wraparound sound effect. 24