JVC MC2000 Instruction Manual - Page 8

CONTROL PANEL AND REMOTE CONTROL Control panel XL-MC2000 COMPACT DISC AUTOMATIC CHANGER 2 STANDBY POWER 1 ' ENHANCED COMPULINK CONTROL SYSTEM Alphabetic letters in brackets following button names indicate their counterparts on the remote control. 4 OPEN/CLOSE 5 STOP/CLEAR 6 PLAY/PAUSE 3 200 OPTICAL DIGITAL OUTPUT EXCHANGE RANDOM INTRO 15 16 7 8 9 REPEAT PLAY MODE MEMORY CALL CANCEL 10 11 12 13 14 DISC/TRACK DOWN UP 17 DISC EJECT 18 DISC 19 TRACK 20 1 POWER button [ a ] Turns the power on and off. The STANDBY indicator above lights when the power is turned off and the unit is in the standby state; it goes out when the power is turned on. (To turn off the unit completely, unplug the power cord from the wall socket.) 2 Display Shows the current operation status (see next page for more information). 3 Disc storage Holds up to 200 discs in slots of a carousel, which rotates inside the disc storage. 4 OPEN/CLOSE button [ e ] Opens or closes the disc storage door. The disc in the play position will be retracted into its carousel slot when the door is opened using this button. 5 STOP/CLEAR button [ p ] Stops playing the disc. Pressing the button in the PROGRAM mode clears all program steps if the unit is stopped. 6 PLAY/PAUSE button [ q , r ] Retrieves a disc from its carousel slot, places it in the play position, and starts playing the disc; or interrupts the playing temporarily, or restarts the interrupted playing. 7 EXCHANGE button [ i ] Opens the disc storage door without retracting the disc currently in the play position, and permits to change discs in the slots positioned in the front. 8 RANDOM button [ f ] Selects or deselects the RANDOM playback function (see the description of playback modes). 9 INTRO button [ g ] Selects or deselects the INTRO playback function (see the description of playback modes). 10 REPEAT button [ h ] Selects or deselects the REPEAT or REPEAT 1 playback function (see the description of playback modes). 65 11 PLAY MODE button [ b , c , d ] Selects in turn a mode of playing successive discs continuously (CONTINUE), one disc only (ONE DISC), or according to a program (PROGRAM). Refer to the description of each playback mode for details. 12 MEMORY button [ o ] Enters specified disc and track numbers as a program step in the PROGRAM mode. 13 CALL button [ m ] Displays the programmed steps for review or deletion in the PROGRAM mode. 14 CANCEL button [ n ] Deletes the currently displayed program step (disc and track numbers) in the PROGRAM mode. 15 (track skip/search backward) button [ s , u ] Skip tracks or search for a track backward. Holding down this button causes playback to fast reverse. 16 (track skip/search forward) button [ t , v ] Skip tracks or search for a track forward. Holding down this button causes playback to fast forward. 17 DISC/TRACK jog dial Used to select a disc or track - the DISC or TRACK button located below the dial determines the dial function. "JOG" and "DISC" or "TRACK" will be shown on the display when the function is selected. 18 DISC EJECT button Raises the disc in the load/unload position of the disc storage when the door is open. Pressing this button when the door is closed retrieves the disc from the play position and brings it to the load/unload position. The disc will then be popped up when the door is opened. 19 DISC button [ j ] Selects the DISC/TRACK jog dial function for discs. 20 TRACK button [ k ] Selects the DISC/TRACK jog dial function for tracks.