JVC SX50M Instruction Manual - Page 15

ENGLISH OTHER MAIN FUNCTIONS Selecting the level meter Selecting the external component You can select the level display according to your preference. When shipped from the factory, "AUDIO 2" is selected. 1 Press and hold SEL (select) for more than 2 seconds. "CLOCK H," "CLOCK M," "LEVEL," or "EXT IN"* appears on the display. * Displayed only when FM, AM, or CD is selected as the source. 2 Select "LEVEL" if not shown on the display. You can connect the external component to the CD changer jack on the rear using the Line Input Adapter KS-U57 (not supplied). To use the external component as the playback source through this unit, you need to select which component to use-CD changer or external component. When shipped from the factory, "CHANGER" is selected. 1 Press and hold SEL (select) for more than 2 seconds. "CLOCK H," "CLOCK M," "LEVEL," or "EXT IN"* appears on the display. * Displayed only when FM, AM, or CD is selected as the source. 2 Select "EXT IN" if not shown on the display. 3 Select the desired mode. 3 Select the desired mode. • AUDIO 1: Shows the audio level indicator. • AUDIO 2: Alternates "AUDIO 1" setting and illumination display. • OFF: Erases the audio level indicator. 4 Finish the setting. • CHANGER: To use the CD changer. • LINE IN: To use the external component other than CD changer. 4 Finish the setting. Note: For connecting the Line Input Adapter KS-U57 and the external component, refer to the Installation/ Connection Manual (separate volume). 15