JVC SX50M Instruction Manual - Page 22

ENGLISH TROUBLESHOOTING What appears to be trouble is not always serious. Check the following points before calling a service center. General FM/AM Symptoms Causes Remedies • Sound cannot be heard The volume level is set to the from the speakers. minimum level. Adjust it to the optimum level. Connections are incorrect. Check the cords and connections. • The unit does not work at all. The built-in microcomputer may have function incorrectly due to noise, etc. While holding SEL (select), press for more than 2 seconds to reset the unit. (The clock setting and preset stations stored in memory are erased.) (See page 2.) • SSM (Strong-station Sequential Memory) automatic preset does not work. Signals are too weak. Store stations manually. • Static noise while listening to the radio. The antenna is not connected firmly. Connect the antenna firmly. • CD automatically ejects. CD is inserted upside down. Insert the CD correctly. • CD-R/CD-RW cannot be played back. • Tracks on the CD-R/CDRW cannot be skipped. CD-R/CD-RW is not finalized. • Insert a finalized CD-R/CD-RW. • Finalize the CD-R/CD-RW with the component which you used for recording. • CD can be neither played back nor ejected. CD is locked. The CD player may function incorrectly. Unlock the CD. (See page 12.) While holding , press 0 for more than 2 seconds. Be careful not to drop the CD when it is ejected. • CD sound is sometimes You are driving on rough roads. Stop playback while driving on interrupted. rough roads. CD is scratched. Change the CD. Connections are incorrect. Check the cords and connections. • "NO DISC" appears on the display. No CD is in the loading slot. CD is inserted incorrectly. Insert a CD into the loading slot. Insert the CD correctly. CD Playback 22