JVC TH-C60 Instructions - Page 12
TH-C60/TH-C50, Connections - parts
UPC - 046838023446
View all JVC TH-C60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Connections Do not connect the power cord until all other connections have been made. Connecting the satellite (front, center, surround) speakers 7 Assembling the speakers - TH-C60/TH-C50 7 For TH-C60: Assemble front speakers and surround speakers. 7 For TH-C50: Assemble front speakers. For the surround speakers of TH-C50, see "Connecting the surround speakers - TH-C50". (See page 10.) For TH-C60 Before assembling - • Prepare a Phillips screwdriver (not supplied). • Take care not to drop any component part while assembling; otherwise, it may cause damage to the floor or injury. 1 Speaker Stand Screw M5 x 40 mm (supplied) 2 Front speaker Surround (SP-THC60F) (2) speaker (SP-THC60S) (2) Stand (4) Base plate (4) • Check the model name of each speaker from the label on the rear to locate each speaker correctly. For TH-C50 When assembling a speaker without stand: Speaker A: Use these screws (M4 x 45 mm) when assembling the speaker with the base plate. Base plate Front speaker (SP-THC60F)(2) Stand (2) Assembled speakers Base plate (2) or With stand: Refer to steps 1 to 3. Without stand: Refer to steps 2 and 3. Stand (or speaker directly)* Screw M4 x 20 mm (supplied)* * When assembling the speaker with the base plate, use the screws A. 3 Red White Black Black You can route the speaker cord by using speaker cord clamp (supplied). 9