JVC TH-C60 Instructions - Page 19
Basic operations - hdmi
UPC - 046838023446
View all JVC TH-C60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Basic operations The buttons on the remote control are used to explain most of the operations in this manual. You can use the buttons on the center unit same as on the remote control for operations unless otherwise noted. IMPORTANT Before using the remote control for the following operation; • Set the remote control mode selector to AUDIO. The buttons described below are used on pages 16 to 18. Turning the system on/off On the remote control: Press F AUDIO. On the center unit: Press F. When DVD or USB MEMORY is selected as the source (see page 17), the following messages will appear on the TV screen. Source selecting buttons Cursor (3/2)/ ENTER Remote control mode selector • "OPEN"/"CLOSE": Appears when opening or closing the disc tray. • "NOW READING" Appears when the system is reading the disc/file information. • "REGION CODE ERROR!": Appears when the Region Code of the DVD VIDEO does not match the code the system supports. The disc cannot be played back. • "NO DISC": Appears when no disc is loaded. • "NO USB DEVICE": Appears when no USB mass storage class device is connected. • "CANNOT PLAY THIS DISC": Appears when unplayable disc is loaded. • "CANNOT PLAY THIS DEVICE": Appears when unplayable USB mass storage class device is connected. STANDBY lamp (play button) NOTE • The STANDBY lamp on the center unit lights red when the power is turned off. The lamp goes off when the power is turned on. • The power supply to the subwoofer is linked to the center unit. The POWER ON lamp on the subwoofer lights green when the power is turned on. • A small amount of power is consumed even when the power is turned off (center unit only). This is called standby mode and the STANDBY lamp lights in this mode. Unplug the power cord from the AC outlet to turn the power off completely. • You can also turn on the system by pressing the following buttons; - One of the DISC (1-5) buttons (with SHIFT pressed) on the remote control - One of the DISC (1-5) 0 buttons on the center unit - One of the source selecting buttons or 3 (play button) on the remote control - One of the DISC (1-5) 3 buttons or 3 on the center unit. • When connecting your TV through HDMI MONITOR OUT terminal, turn on the TV before turning on the system; otherwise, the following phenomena may happen depending on the TV. - The scan mode setting (see page 18) is changed. - The sound comes out from the speakers on TV even though "HDMI AUDIO OUT" in the AUDIO menu (see page 34) is set to "OFF". If the above phenomena happen, turn off the system and turn it back on, then set the scan mode again. 16