JVC TH-M45 Instructions - Page 31
Selecting the FM, reception mode, Reducing the noise of AM, broadcast, Press MEMORY again.
UPC - 046838259777
View all JVC TH-M45 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Tuner operations 2 Press MEMORY. The channel number position starts flashing on the display window for about 5 seconds. While the channel number position is flashing: 3 Press number button(s) (1-10, +10) to select a channel number. The channel number and the CH indicator start flashing. Examples: For channel number 3: Press 3. For channel number 14: Press +10, then 4. (For FM stations only) For channel number 24: Press +10 twice, then 4. For channel number 30: Press +10 twice, then 10. While the selected number is flashing: 4 Press MEMORY again. The selected number stops flashing. The station is assigned to the selected preset number. 5 Repeat steps 1 to 4 until you store all the stations you want. To erase a stored preset station Storing a new station to a used number erases the previously stored one. 7 To tune in to a preset station On the remote control: 1 Press FM/AM repeatedly to select the band. Each time you press the button, the band alternates between FM and AM. 2 Press number button(s) (1-10, +10) to select a preset channel number. Examples: For channel number 3: Press 3. For channel number 14: Press +10, then 4. (For FM stations only) For channel number 24: Press +10 twice, then 4. For channel number 30: Press +10 twice, then 10. Selecting the FM reception mode When the stereo FM program currently tuned in is noisy, you can change the FM reception mode to improve the reception. • You can store the FM reception mode for each preset station. See "Preset tuning" (A pg. 27). 7 While listening to an FM station On the remote control: Press FM MODE. The FM reception mode appears on the display window. Each time you press the button, the FM reception mode alternates between "AUTO MUTING" and "MONO". • AUTO MUTING: When a program is broadcast in stereo, you will hear stereo sound. (The ST indicator lights on the display window.) When in monaural, you will hear monaural sound. This mode is also useful to suppress static noise between stations. The AUTO MUTING indicator lights on the display window. • MONO: Reception will be improved although you will lose the stereo effect. (The ST indicator goes off.) In this mode, you will hear noise until you are tuned in to a station. (The AUTO MUTING indicator also goes off.) Reducing the noise of AM broadcast When listening to an AM broadcast with a lot of noise interference, you can change the Beat Cut mode to reduce the noise. 7 While listening to an AM station On the remote control: Press FM MODE. The current Beat Cut mode appears on the display window. Each time you press the button, the Beat Cut mode alternates between "BEAT CUT 1" and "BEAT CUT 2". • Choose "BEAT CUT 1" or "BEAT CUT 2" according to which gives clearer sound. 28