JVC TK-C215VP4U Instructions - Page 20

Procedures from Connection to Setting, Installation and Connection

Get JVC TK-C215VP4U - CCTV Camera PDF manuals and user guides
UPC - 046838027475
View all JVC TK-C215VP4U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Installation and Connection Procedures from Connection to Setting Follow the procedures below to connect/set this unit. Turn off the power of devices to be used before connecting the cables. ⅷ Before touching the camera unit, make sure to touch the metal surface of the [MONITOR] terminal to discharge any static electricity from your body. Static electricity may cause the camera to malfunction. ⅷ When mounting the base to the ceiling, or when connecting the cable of the camera unit, pay enough attention to the fall of each part. 16 step 1 K step 2 K step 3 K step 4 K step 5 K step 6 K step 7 Set the switches (A Pg. 17) Remove the dome cover, followed by setting the video image switches. Mounting the base (A Pg. 17) Mount the base to the wall or ceiling. Connect the cable (A Pg. 19) Connect the coaxial cable and power supply for the heater. Mounting the camera unit (A Pg. 20) Fill the piping hole and screw hole with a sealing material, followed by mounting the camera unit to the base. Adjusting the video image (A Pg. 22) Adjust the camera's angle, focus and brightness. Mounting the inner dome (A Pg. 24) After setting is complete, mount the inner dome to the camera. Mounting the dome cover (A Pg. 24) Insert the silica gel into the designated space to prevent fogging of the dome cover, followed by mounting the dome cover.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
16
Installation and Connection
Follow the procedures below to connect/set this
unit.
Turn off the power of devices to be used before
connecting the cables.
K
K
K
K
K
K
Procedures from
Connection to Setting
²
Before touching the camera unit, make
sure to touch the metal surface of the
[MONITOR] terminal to discharge any
static electricity from your body. Static
electricity may cause the camera to
malfunction.
²
When mounting the base to the ceiling, or
when connecting the cable of the camera
unit, pay enough attention to the fall of
each part.
step 1
Set the switches
(
A
Pg. 17)
Remove the dome cover, followed
by setting the video image
switches.
step 2
Mounting the base
(
A
Pg. 17)
Mount the base to the wall or
ceiling.
step 3
Connect the cable
(
A
Pg. 19)
Connect the coaxial cable and
power supply for the heater.
step 4
Mounting the camera unit
(
A
Pg. 20)
Fill the piping hole and screw hole
with a sealing material, followed
by mounting the camera unit to
the base.
step 5
Adjusting the video image
(
A
Pg. 22)
Adjust the camera’s angle, focus
and brightness.
step 6
Mounting the inner dome
(
A
Pg. 24)
After setting is complete, mount
the inner dome to the camera.
step 7
Mounting the dome cover
(
A
Pg. 24)
Insert the silica gel into the
designated space to prevent
fogging of the dome cover,
followed by mounting the dome
cover.