JVC TM-H1950CGU Instruction Manual - Page 9
Preparation, Installing The Input Card
View all JVC TM-H1950CGU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
PREPARATION Ⅵ INSTALLING THE INPUT CARD 1. Turn off the Color Video Monitor's main power and unplug the power cable from the AC outlet. 2. Unscrew the screws and remove the slot cover from the slot (on the rear side of the monitor) in which you are going to install the card. Rear side of the TM-H1950CG color video monitor SLOT REMOTE VIDEO A IN VIDEO B IN IN OUT OUT Y/C Slot cover 3. Insert the Input Card's board (green-colored) into the slot, fitting the board into the guide rails on the top and bottom of the slot. Fit the board to the guide rails. Knob REMOTE SLOT VIDEO A IN VIDEO B IN IN OUT OUT Y/C Guide rails Knob Input card (the illustration shown is of the IF-C01COMG) 4. Push the Input Card in so that its front panel touches the monitor's rear panel. 5. Secure the Input Card by replacing the screws removed in Procedure 2. SLOT REMOTE VIDEO A IN VIDEO B IN IN OUT OUT Y/C NOTE : Do not touch the terminal connected to the monitor or board pattern. Do not remove slot covers from the monitor's slots if they are not in use. 8