JVC XV-M555BK Instruction Manual - Page 19

Getting started Getting started To use the remote control unit for TV operation You can operate your TV from the remote control unit. English Français Setting the remote control signal for operating your TV. 1 Holding down TV/VIDEO, enter the manufacturer code of your TV listed below by using the numeric buttons (0 - 9). Do not release TV/VIDEO. Keep holding it until the next step is completed. Manufacturer code list No. Manufacturer 01 JVC 02 JVC 03 JVC 04 JVC 05 THOMSON 06 FERGUSON 07 PHILIPS 08 GRUNDIG 09 SONY 10 PANASONIC 11 ITT 12 MIVER 13 HITACHI 14 TOSHIBA 15 MITSUBISHI 16 FINLUX 17 NOKIA 18 SHARP 19 SAMSUNG 20 FUNAI 21 GOLDSTAR 22 NEC Example: To enter the manufacturer code "01": Press "0" then "1." 2 Press 7 while holding down TV/VIDEO. The following buttons can be used for operating the TV: SHIFT + DVD / TV / + TV ch - + TV VOL. - SHIFT + 0 to 9 Turns the TV on or off. Changes the TV channels. Adjusts the TV volume. Selects the TV channels *For some TVs, pressing "+10" while holding down SHIFT functions as the "RETURN," and pressing "10" while holding down SHIFT functions as the "_ / _ _" button. TV/VIDEO Switches input mode (either TV or VIDEO). 3 Try to operate your TV by pressing DVD - TV while holding SHIFT. If your TV turns on or off, you have successfully set the control signal. NOTES • The remote control unit is initially set for operating a JVC TV. • If there is more than one code listed for the manufacturer of your TV, try them one by one until you succeed. 16