JVC XV-M555BK Instruction Manual - Page 39

SUBTITLE You can select the default subtitle language to be displayed when it is contained on a playback disc. Each time you press CURSOR 3, the language setting changes in the following order: LANGUAGE AUDIO DISPLAY SYSTEM MENU LANGUAGE AUDIO LANGUAGE SUBTITLE ON SCREEN LANGUAGE ENGLISH ENGLISH ENGLISH ENGLISH EXIT PRESS KEY ENGLISH = SPANISH = FRENCH = CHINESE = GERMAN = ITALIAN = JAPANESE = language code from AA to ZU (See "Table of languages and their abbreviations" at the end of this manual.) Pressing CURSOR 2 changes the language setting in the reverse order of the above. * If the selected language is not recorded, the disc's default subtitle language will be displayed. ON SCREEN LANGUAGE You can select the on-screen display language to be displayed. Each time you press CURSOR 2/3, the language setting changes as follows: LANGUAGE AUDIO DISPLAY SYSTEM MENU LANGUAGE AUDIO LANGUAGE SUBTITLE ON SCREEN LANGUAGE ENGLISH ENGLISH ENGLISH ENGLISH EXIT PRESS KEY ENGLISH DEUTSCH (German) FRANCAIS (French) English German French ON SCREEN LANGUAGE BILDSCHIRMMENUE-SPRACHE LANGUE D'ECRAN ENGLISH DEUTSCH FRANCAIS Initial settings AUDIO page DIGITAL AUDIO OUTPUT To connect the unit's digital output to an external device equipped with a digital input, this item must be set correctly. LANGUAGE AUDIO DISPLAY SYSTEM DIGITAL AUDIO OUTPUT DOWN MIX COMPRESSION DOLBY DIGITAL /PCM Lo / Ro ON PRESS KEY EXIT English Français • PCM ONLY: When you connect the DIGITAL OUT jack of the unit to the linear PCM digital input of other audio equipment. • STREAM/PCM: When you connect to the digital input of an amplifier with a built-in DTS, Dolby Digital, or MPEG multichannel decoder. • DOLBY DIGITAL/PCM: When you connect to the digital input of a Dolby Digital decoder, or an amplifier with a built-in Dolby Digital decoder The following chart shows the relationship between types of playback discs and output signals. Playback discs Output STREAM/PCM DOLBY DIGITAL/PCM PCM ONLY DVD with 48-kHz, 48-kHz, ← ← 16-bit linear PCM 16-bit linear PCM DVD with 48-kHz, 48-kHz, ← ← 20/24-bit linear 20-bit linear PCM PCM DVD with 96-kHz, No output ← ← linear PCM DVD with DTS DTS No output ← bitstream DVD with Dolby Dolby Digital ← Digital bitstream 48-kHz, 16-bit linear PCM DVD with MPEG MPEG 48-kHz, 16-bit ← multichannel bitstream linear PCM Video CD 44.1-kHz, ← ← 16-bit linear PCM Audio CD 44.1-kHz, ← ← 16-bit linear PCM Audio CD with DTS ← ← DTS bitstream NOTES • The unit does not provide the DTS decoding function. • When playing a DVD or Audio CD disc with DTS, use a DTS decoder to get the correct signals for your speakers. Never use the unit's analog output jacks, which output incorrect signals that may damage your speakers. If you connect the analog outputs and digital outputs simultaneously, be sure to select the source of the amplifier correctly, or set the level control of the amplifier connected to the analog outputs to minimum. 36 Initial settings