JVC XV-M555BK Instruction Manual - Page 45
Troubleshooting
View all JVC XV-M555BK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Additional information Troubleshooting What appears to be a malfunction may not always be serious. Please go through the following list before requesting service. English Français Symptom Power does not come on. Remote control does not work. Possible case Power plug is not inserted securely. Too far from the unit. The tip of the remote unit is not pointed in the right direction. Batteries are exhausted. Battery polarity is incorrect. No picture is displayed on the monitor. Connection of video cable is incorrect. Input selection of TV is incorrect. Disc is not playable. Picture is noisy. The unit is connected to a VCR directly and the copyguard function is activated. No audio is reproduced. Connection is incorrect. Input selection of amplifier is incorrect. No audio is reproduced when The audio signal is derived from playing back a DVD disc recorded the unit's DIGITAL OUT. with 96-kHz, linear PCM audio. Sound is distorted or noise is generated. Disc is dirty. Picture does not fit the television MONITOR TYPE is not correctly set. screen. Television is not correctly set. Operation is not possible. Microcomputer malfunction due to lightning or static electricity. Moisture condensation caused by a sudden change of temperature or humidity. Remedy Plug in securely. More closer to the unit. Point the infrared light- emitting window toward the remote sensor on the front panel. Replace the batteries with new ones. Take out the batteries and insert them again in the correct direction. Connect the cable correctly. Select correctly. Use a playable disc. (See page 11.) Connect the unit so that the picture signal flows directly to the TV. Check the connections. Select correctly. Use the AUDIO OUT when playing back such discs. Wipe the disc surface. Select monitor type correctly. (See page 37.) Set the television correctly. Turn off the power and unplug the power cord, then connect the power cord again. Turn off the power, then turn it on a few hours later. Additional information 42