JVC XV-N50BK Instruction Manual - Page 11

5 Press ENTER. The third page is shown, in which the pull-down menu of the [DIGITAL AUDIO OUTPUT] is already open. DVD PLAYER SET UP DIGITAL AUDIO OUTPUT ANALOG DOWN MIX D RANGE CONTROL OUTPUT LEVEL DOLBY DIGITAL/PCM PCM ONLY DDOOLLBBYYPDRIOGLIOTGAILC/PCM SOTNREAM/PCM SELECT ENTER USE 5∞23 TO SELECT, USE ENTER TO CONFIRM DIGITAL AUDIO OUTPUT options 6 Press 5/∞ to select a desired digital output signal type. Set this item correctly when you connect the player to an external surround decoder or D/A converter. (If you do not connect the player to such a device, you do not have to set this item.) • When connecting to a Dolby Digital decoder, select [DOLBY DIGITAL/PCM]. • When connecting to a DTS decoder, select [STREAM/ PCM]. • When connecting to other digital device, select [PCM ONLY]. 7 Press ENTER. The TV screen returns to the opening display. To bring up the DVD PLAYER SET UP display later Press CHOICE for a few seconds until the DVD PLAYER SET UP display appears. To change the brightness of the display window Press DIMMER on the remote control unit. You can select the display window brightness from three levels, or off. If the brightness is set to off, nothing will be shown on the display. Basic playback Basic operations English 1 Press 0 (or OPEN/CLOSE on the remote control unit) to open the disc tray. 2 Place a disc in the disc tray. With the label side up Basic operations PROGRESSIVE • To insert an 8-cm disc, place it in the inner recess. 3 Press 3. The player starts playback from the beginning. If a menu is shown on the TV screen When inserting a DVD VIDEO, SVCD or Video CD disc, a menu may be shown on the TV screen. From the menu, you can select a desired item to be played back. For DVD VIDEO 1 Press 5/∞/2/3 to select a desired item. 2 Press ENTER. The player starts playback of the selected item. For SVCD/Video CD Press the numeric buttons to select a desired item. The player starts playback of the selected item. NOTES • Do not insert an unplayable disc. (See page 2.) • When inserting a disc on the disc tray, be sure to position the disc inside the recess. Otherwise, the disc may be damaged when the disc tray is closed, or you may not be able to remove the disc from the player. About PBC (Playback Control) Some SVCD/Video CD discs support the PBC function. The PBC function allows you to enjoy menu-driven operation and high-resolution still images which have a resolution four times greater than moving pictures. • To play a PBC-compatible SVCD/Video CD disc without activating the PBC function, press the numeric buttons instead of 3 to start playback. • To activate the PBC function again, 1) press TOP MENU or MENU, or 2) press 7 to stop playback, then press 3. 9