JVC XV-N50BK Instruction Manual - Page 13
Various speed playback, x1.5 Quick Playback with sound
UPC - 046838259890
View all JVC XV-N50BK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Basic operations To resume playback When the resume mode is "ON" While the disc you interrupted playback is still on the disc tray, press 3. The player resumes playback from the position where playback was interrupted. The TV screen shows [RESUME PLAY]. To play back from the beginning Press 7 before pressing 3 to start playback. When the resume mode is "DISC RESUME" 1 Press 0 to insert a disc for which the player has stored an interrupted position. The TV screen shows [RESUME STOP]. 2 Press 3. The TV screen shows [RESUME PLAY] and the player resumes playback from the position where playback was interrupted. To play back from the beginning After inserting the disc, press 7 before pressing 3 to start playback. NOTES • If you change the [RESUME] setting from [DISC RESUME] to [OFF] or [ON], you cannot resume playback of a disc whose "resuming" position is stored. However, when you again set [RESUME] to [DISC RESUME], you will then be able to resume playback of the disc. • If you interrupt the playback of a disc for which an interrupted position has already been stored, the memory will be updated with the new interrupted position. • For a double-sided DVD VIDEO disc, the player regards each side as a different disc. Therefore, to resume playback of such a disc, the disc must be inserted with the same side down. • When the player memorizes an interrupted point for a disc, it also memorizes Audio, Subtitle and Angle settings. • The player may not resume playback exactly from the interrupted point. In the case of an SVCD/Video CD disc with PBC function, the player may resume playback from a point slightly earlier or later than the point where playback was interrupted. English Various speed playback To advance or reverse playback rapidly while monitoring During playback, press ¡ or 1 on the remote control unit. You can select from 1.5 times, 5 times, 20 times and 60 times normal speed. Pressing 3 returns the player to normal playback. During playback, hold down ¢ or 4. Playback is advanced or reversed at 5 times normal speed. NOTE During rapid playback, the sound will be muted except when playing an Audio CD, and when playing a DVD VIDEO or Video CD at 1.5 times normal speed. For Audio CD discs, the sound will be heard intermittently. x1.5 Quick Playback with sound When you select 1.5 times normal speed playback, the disc is played back with sound. • For DVD VIDEO discs, the subtitle does not go of. • If the sound of a DVD VIDEO disc is recorded in Dolby Digital or DTS format, stereo linear PCM signals are output. With some DVD VIDEO discs, the sound quality and volume may alter, or the sound may be out of tune. • To switch from rapid reverse playback to x1.5 Quick Playback, first press 3, then press ¡ once. To advance a still picture frame by frame While paused, press 8. Each time you press 8, the still picture advances to the next frame. Pressing 3 returns to normal playback. To play back in slow motion Basic operations You can select from 1/32 times, 1/16 times, 1/4 times and 1/2 times normal speed. During playback, press 8, then press ¡ (to play forward slow motion), or 1 (to play reverse slow motion, for DVD VIDEO disc only). Pressing 3 returns to normal playback. NOTES • During slow motion playback, the sound will be muted. • Reverse slow motion playback is not possible for an SVCD and Video CD. 11