Jabra FREEWAY User manual - Page 16

ENGLISH Enable or disable Voice Guidance and commands Press and hold the Voice button while sliding the Power switch into the On position. You will hear "Voice on" when you enable and "Voice off" when you disable the voice features. Reset to factory default Turn on the FREEWAY and press and hold the Answer/end, Voice and Mute button together for about 6 seconds. When the FREEWAY is reset it will automatically go into pairing mode. Night driving mode When powered on you can tap the Vol- and Vol+ simultaneously to disable the LED's. And again to enable them again. The LED's will be enabled every time you reconnect or power on the FREEWAY. Download Firmware updates and additional languages Go to jabra.com/freeway and download the latest firmware and additional languages. TROUBLESHOOTING & FAQ I hear crackling noises - Bluetooth is a radio technology, which means it is sensitive to objects between the speakerphone and the connected device. It is designed for the speakerphone and the connected device to be used within 33 feet (10 meters) of each other, with no major objects in the way (walls, etc.). I cannot hear anything in my speakerphone - Increase the volume in the speakerphone. - Ensure that the speakerphone is paired to a device that is playing. - Make sure your phone is connected to the speakerphone by tapping the Answer/End button. JABRA FREEWAY 15