Jabra GN9120 User Manual - Page 6
Remote handset lifting functionality - manual
UPC - 706487008675
View all Jabra GN9120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
3. Remote handset lifting functionality Answering and making telephone calls with GN1000 You may purchase a GN1000 as an accessory, which lets you answer and end telephone calls while away from your desk. Please contact your vendor or visit www.jabra.com for further information. To answer a call using the GN1000 or electronic hook switch functionality: 1. Remove the headset from the base unit when you receive a call. The link will be established and the on-line indicator on the front of the base unit will begin to flash. Note: If you are already wearing the headset, you will be notified of incoming calls with a ringtone in your headset. To accept the call, press the multifunction button once. To end the call, press the multifunction button again. Making telephone calls using the GN1000 or electronic hook switch functionality: To make a telephone call using the GN1000: 1. Remove the headset from the base unit. The link will be established and the on-line indicator on the front of the base unit will begin to flash. 2. Dial the desired number. To end the call, press the multifunction button momentarily or place the head- set in the base unit. Note: The connection cord must be connected to your telephone's handset port (not the headset port) in order for the GN1000 to function. GN9120/GN9125 with Electronic Hook Switch (EHS) The GN9120/GN9125 comes in versions which enables you to answer and end calls while away from your desk - without using the GN1000. This is, however, only possible on certain telephone systems. In order to determine which telephones have the EHS feature enabled, please refer to our website www.jabra.com. Please also refer to your telephone's user manual for clarification. 3 modes are available: • The MSH interface (Alcatel) • The RHL interface (non-EHS; works with the GN1000) • The DHSG interface (for example, with Siemens and Elmeg desk telephones) How to switch between the RHL, DHSG, and MSH interface modes: 1. Place the headset onto the base. Make sure that the base display is turned towards you. 2. With the headset resting on the base, press the volume control keys „+ and -„ simultaneously (hold approx. 6-8 seconds), until the red Online indicator on the headset starts to flash rapidly. - Volume button + 3. You are now in interface switching mode, and can set the GN9120/GN9125 to work with your telephone's interface. MSH RHL DHSG Now you may use the „+ and -„ volume control Visual indicator (red) keys to move between the individual software modes. The base unit's 3 indicators show which Link icon interface the GN9120/GN9125 is in. See the illus- Mute icon tration to determine the type of interface. 4