Jabra GN9120 User Manual - Page 7

Note: If more than 15 seconds elapses without pressing the volume + or volume - buttons, the last selected interface will be activated. 4. Audio and visual indicators The GN9120/GN9125's headset and base have audio and visual indicators, which represent various actions and aspects associated with setting up and operating the product. The headset gives audio and visual indications. The base gives various visual indications via its online, link and general indicators. Familiarize yourself with these indicators to fully benefit from your GN9120/GN9125. The headset's audio indicators: Headset action Out of range Mute ON Low Battery Charge Adjusting Volume Maximum Volume reached Minimum Volume reached Tone control adjustment Adding a headset at conference call Incoming call Audio indication Beep every 10 sec. Beep every 15 sec. Beep every 20 sec. Low single tone per press Short beep Short beep Beep (indicating 6 sec. has passed) Beep in master headset Ringtone (only when using the GN1000, or in the interface modes DHSG and MSH, if they are supported by the telephone equipment) The headset's visual indicators: Headset mode Low Power mode Transmit volume adjustment Headset indicator Flashes rapidly when switching between modes Flashes rapidly when switching between modes The base's visual indicators: Base's on-line indicator Charging in Process Charging completed Mute Low Power Mode Adding a headset to conference call Link between headset and base EHS (Electronic Hook Switch) setting Pairing of Headset and Base On a call On-line indicator Battery charging indicator flashes Battery charging indicator ON Mute indicator ON Link-up indicator flashes every 10 sec. All lights are flashing, followed by battery indicator ON Link-up indicator ON Please refer to separate section All lights are flashing for approx. 4 sec., followed by battery indicator ON On-line indictor flashes 5