Jabra SUPREME User manual - Page 5

ENGLISH GETTING STARTED Please follow these steps before using the Jabra SUPREME: 1 Charge the Jabra SUPREME using the supplied AC charger and USB cable. 2 Activate Bluetooth® on your phone or device (refer to the manual of your device) 3 Turn your Jabra SUPREME on by flipping open the boom, and pair it with your mobile device by following the voice guidance. NOTE: Voice Guidance and Voice commands are enabled as the default setting when you turn on your Jabra SUPREME the first time. You can at any time disable both by pressing the Voice button while you flip the boom arm to On position. You will hear "Voice off" and SUPREME will no longer talk to you or listen for commands. Repeat the process to enable the voice features again. CHARGE YOUR JABRA SUPREME Make sure that your headset is fully charged before you start using it. Use the USB cable to connect Jabra SUPREME to a USB port or use an AC charger. The battery indicator light will Flash Green while charging. When light goes out the charge is complete. A full charge takes approximately two hours. . Only use the charger provided in the box - do not use chargers from other devices as this may damage your headset. Also you should not use your supplied SUPREME charger to charge other devices. NOTE: The lifetime of the battery will be significantly reduced if your device is left uncharged for a long period. We therefore recommend that you recharge your device at least once a month. WEARING STYLE The Jabra SUPREME is ready to be worn for right ear wearing, but if you prefer left ear wearing remove the ear hook and turn it and JABRA SUPREME 4