Jenn-Air JFFCC72EHL Owners Manual - Page 23

Max Cool Pure Freeze® Mode The Max Cool feature assists with periods of high refrigerator use, full grocery loads, or temporarily warm room temperatures. ■■ To turn on the Max Cool feature, press the Max Cool button. When the button is pressed, the icon will blink 3 times, and appear on the display screen. ■■ To manually turn off the Max Cool feature, press the Max Cool button and the display will blink 3 times and turn off. The Max Cool feature will remain on for 24 hours unless manually turned off. Adjusting the refrigerator temperature will automatically turn off the Max Cool feature. NOTE: Setting the freezer to a colder temperature may make some foods, such as ice cream, harder. Max Ice The Max Ice feature assists with increasing the cooling for the freezer compartment in order to increase ice production. ■■ To turn on or off the Max Ice feature, press the Max Ice button. When the button is pressed to turn the feature on, the icon will blink 3 times, and appear on the display screen. ■■ To manually turn off the Max Ice feature, press the Max Ice button and the display will blink 3 times and turn off. The Max Ice feature will remain on for 24 hours unless manually turned off. Adjusting the refrigerator temperature will automatically turn off the Max Ice feature. NOTE: Setting the freezer to a colder temperature may make some foods, such as ice cream, harder. Water Filter Reset This feature minimizes moisture migration from frozen food. This in turn reduces the freezer burn occurrence. To turn on the Pure Freeze® mode, toggle to the coldest freezer temperature set point. To turn off the Pure Freeze® mode, toggle from the coldest freezer set point to any other temperature. Sound On/Off The Sound button allows the customer to turn the sound on and off. ■■ To turn on the Sound feature, press the Sound button. When the button is pressed, the sound icon will blink 3 times and appear on the display screen. ■■ To manually turn off the Sound feature, press the Sound button and the display will blink 3 times and turn off. Power Outage The Power Outage indicator lets you know if the power supply to the refrigerator has been off and the freezer temperature has risen. The control panel display will read "Power Outage" and an alert tone will sound 3 times. Touch any button to stop the tone and touch any button again to turn off Power Outage icon. Once the power outage has been confirmed, "Power Outage" icon will disappear and the display will return to the Home screen. Showroom Mode Displays the status of the water filter. To reset the filter, press MAX ICE and MAX COOL for 3 seconds. After countdown, the Good icon will blink 3 times and remain lit. NOTE: The Water Filter status lights on the internal controls will let you know when to change your water filter. ■■ ORDER FILTER (Yellow) - Order a replacement water filter. ■■ REPLACE FILTER (Red) - Replace the water filter. While you are dispensing water, "Replace" Filter icon will flash constantly from beginning to the end of dispensing. After 14 days without replacing the water filter, the "Replace" Filter icon will blink 7 times and an alert tone will sound 3 times at the end of dispensing. See the "Water Filtration System" section. NOTE: REPLACE FILTER will remain illuminated if a filter reset is not done. ■■ RESET FILTER - Touch MAX ICE and MAX COOL at the same time on the Temperature Control display for 3 seconds to reset water filter. The display will do a 3-second countdown and then flash the icon and play a tone. Filter Status The JennAir® app will send an alert that displays the water filter status. This mode is used when the refrigerator is on display in a retail store or if you want to turn the cooling off and deactivate all other functions except interior lighting. Showroom mode can be used when going on vacation. See the "Vacation and Moving Care" section for proper steps on leaving your refrigerator in this mode for long periods of time. If you turn on Showroom mode, the word "Showroom" will light up on the display. Enter or Exit Showroom mode by pressing and holding °F/°C and DRAWER at the same time for 3 seconds. NOTE: Empty ice maker if refrigerator is going to be turned off for an extended period of time. Sabbath Mode Allows the door of the refrigerator or freezer to be opened or closed during the Sabbath or other religious holidays without activating the interior lights or controls. The freezer and refrigerator user set points remain unchanged while in this mode. If you unintentionally turn on Sabbath mode, the word "Sabbath" will light up on the display. Enter and exit Sabbath mode by pressing and holding °F/°C and SOUND at the same time for 3 seconds. NOTE: You will be unable to dispense or change temperature set points in Sabbath mode. Your interior lighting and control panels will all be inactive in Sabbath mode. 23