Jenn-Air JMC3415ES Installation Instruction - Page 6
Installation Instructions
View all Jenn-Air JMC3415ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
INSTALLATION INSTRUCTIONS WARNING Excessive Weight Hazard Use two or more people to move and install microwave oven. 4. Position duct 3 on the top of the microwave oven, inserting the edge of ducts 1 and 2 into duct 3. Secure duct 3 to ducts 1 and 2 using 2 #8-14 x Z\x" screws. #8-14 x 1⁄x" screw Ducts 1 and 2 Duct 3 Failure to do so can result in back or other injury. IMPORTANT: To prevent damage, do not remove protective film on the frame. 1. Empty microwave oven cavity of any loose contents, including turntable. 2. Ensure floor of cabinet is level. #8-14 x 1⁄x" screw Install Rear and Top Ducts 1. Insert the edge of duct 1 into duct 2. Fasten together with 1 #8-14 x Z\x" screw. Duct 1 Duct 2 5. Position duct 4 on top of the microwave oven and insert it into duct 3. Secure duct 4 to duct 3 using 2 #8-14 x Z\x" screws. Duct 4 #8-14 x 1⁄x" screw 2. Remove the 2 existing #8-18 x C\," screws at upper right and left corners of the microwave oven. #8-18 x 3⁄," screw #8-18 x 3⁄," screw #8-14 x 1⁄x" screw Duct 3 #8-14 x 1⁄x" screw IMPORTANT: The double holes on duct 4 go toward the back of the microwave oven. On each side of duct 4, screw 1 #8-14 x Z\x" screw into the front-most hole of the double hole. 3. Secure ducts 1 and 2 with #8-18 x C\," screws just removed from the microwave oven. Duct 1 Duct 2 #8-18 x 3⁄," screw #8-18 x 3⁄," screw Use hole closest to front of microwave oven. 6. Position duct 5 on top of the microwave oven and insert it into duct 4. Secure duct 5 using 3 #8-14 x Z\x" screws provided. #8-14 x 1⁄x" screw #8-14 x 1⁄x" screw #8-14 x 1⁄x" screw Duct 4 Duct 5 6