Jenn-Air JMC3415ES Installation Instruction - Page 8
Install Microwave Oven and Trim Kit Frame
View all Jenn-Air JMC3415ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Install Microwave Oven and Trim Kit Frame 1. Moving from right to left, remove the third and sixth screws from the front of the microwave bottom plate. NOTE: Do not remove screws from door. 4. Place the microwave oven in the cabinet on the risers. Make sure the feet are firmly seated in embossments located on risers. Verify that microwave oven is level. Riser 2. Use the screws just removed to install the Bottom Duct Attachment Brackets in the same holes the screws were removed from. Embossment 5. Secure the microwave oven to the bottom duct. Using 2 #10-C\v" x B\zn" self-drilling screws, fasten the Bottom Duct Attachment Brackets to the first and fourth holes in the front of the bottom duct. Bottom Duct Attachment Brackets Holes for Bottom Duct Attachment Brackets Bottom Duct Attachment Brackets 3. With the microwave oven near the opening, plug the microwave oven into the grounded 3 prong outlet. NOTE: To avoid pinching of the power cord, make sure it is away from the bottom duct. Plug into a grounded 3 prong outlet. 8