Jenn-Air JVD0303GS Installation Instruction - Page 16

#1 Continued C) Remove tape and position connectors into electrical box. 2. Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped. 3. Check that you have all your tools. 4. Dispose of/recycle all packaging materials. 5. Use a mild solution of liquid household cleaner and warm water to clean cooktop and/or vent before use. Dry thoroughly with a soft cloth. For more information, see the "Cooktop Care" and "Vent Care" sections of the Use and Care manuals. 6. See the "Cooktop Use" and "Vent Use" sections of the Use and Care manuals for operating instructions. WARNING D) Using the 3 screws removed earlier, assemble cable plate to electrical box. A. Assemble ground wire Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. A Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. 7. Plug into a grounded 3 prong outlet, cord is to be routed to rear of blower and away from heat generated by cooktops. 8. Test cooktop and downdraft vent to confirm all are working. NOTE: If the cooktop and/or vent does not work after turning on the power, check that a circuit breaker has not tripped or a household fuse has not blown. See the "Troubleshooting" section of your Use and Care manual for further information. If you need Assistance or Service: Please reference the "Warranty" section of your Use and Care manual. 16