Jensen JMV111 Operation Manual - Page 5

CONTROL FUNCTION DESCRIPTION (FRONT VIEW) 9. POWER ( ) Button Used to turn the system on/off. Bright red when the system is on, dim when off. 10. Dome Lights Provide additional interior illumination. 11. Infrared Transmitter and Sensor Use to transmit audio the wireless headphone. Also allows the remote control to operate the JMV12 and to control other accessories in the system. 12. Three Position Dome Light Switch ON - Turns on the dome lights. OFF - The dome lights will not turn on in this position. AUTO - Automatically switches on the dome lights in conjunction with the vehicle's interior illumination. 13. Ventilation Openings 14. LCD Cut Off Switch Used to turn off the LCD panel monitor when in the closed position. 15. LCD Panel 16. Screen Release Press to release the screen. The JMV12 has an option that allows the user to select from two IR transmit and receive codes (M1 or M2). This feature can be used when using two JMV12s in the same installation or if the vehicle has an RSA (Rear Seat Audio) that uses an "A" channel headset. The JMV12 comes factory set to M1. When in the M1 mode the unit will respond to remote commands when M1 is selected on the remote and will transmit audio on the A channel. When in the M2 mode the unit will respond to remote commands when M2 is selected on the remote and will transmit audio on the B channel. Note: 2-channel IR headphones will need to be used when monitor is set to M2 mode. Note: OSD will appear on the screen for 4~5 seconds Selecting a Monitor Code (M1 or M2) 1. Press and hold the SOURCE and FMM buttons on the unit for 3 seconds and the unit will switch from M1 to M2 or M2 to M1. 2. The selected mode (M1 or M2) will be retained in memory until changed by the user. FMM 88.3MHz AUX/GAME FMM OFF DVD M1 M2 IRT ON 5 IRT OFF