Jensen UCD200 Owners Manual - Page 11

UCD200 CD PLAYER OPERATING INSTRUCTIONS 15 Disc Slot With the label surface facing up, gently insert the disc into the slot until the soft-loading mechanism engages and disc play begins. "LOAd" will appear momentarily. Once loaded, the ( ) indication will become animated and the track number and elapsed time will appear in the display. NOTE: The unit is designed for play of standard 5" (12 cm.) compact discs only. Do not attempt to use 3" (8 cm.) CD singles in this unit, either with or without an adaptor, as damage to the player and/or the disc may occur. Such damage will not be covered by the warranty on this product. 7 Track Selector (TUNE/ TRACK) The Track Select functions are used to quickly access the beginning of a particular track. Each time the TUNE/TRACK ( ) button (7a) is pressed, the next higher track number is selected, as shown on the display panel. Each time the TUNE/TRACK ( ) button (7b) is pressed, the next lower track number is selected, as shown on the display panel. 7 Cue/Review Functions Press and hold the TUNE/TRACK ( ) button (7a) to advance rapidly forward or the TUNE/ TRACK ( ) button (7b) to advance rapidly backward. During either function, the elapsed time of each track will be shown on the display panel. 16 Disc Play/Pause Select Press the button (16) to freeze disc play. "PAUS" will appear on the display. Press again to resume disc play and the "PAUS" indication will disappear. 17 Track Scan Select (SCN) During disc play, press the SCN button (17) to play the first 10 seconds of each track. ("SCN" will be displayed with the track number). When a desired track is reached, press the SCN button again to cancel the function and play the selected track. Track Scan mode can also be canceled by activating the Repeat Play (18) or Random Play (19) functions. 15 7b 7a RELEASE / PWR EQ AUDIO SEL UCD200 AMS 1 AM / FM / CD RECEIVER 2 SCN 3 RPT 4 RDM 5 6 EJECT MODE DISP TUNE TRACK BAND MON LOU MUT 16 17 11