Jensen UCD200 Owners Manual - Page 9
Tuning Control, Audio Mute MUT, FM Mono Select MON, Auto-Store / Pre-Set Scan, Tuning AMS - manual
UPC - 043258301659
View all Jensen UCD200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
UCD200 OPERATING INSTRUCTIONS 7 Tuning Control Seek Tuning Press the TUNE/TRACK ( ) button (7a) to tune the radio higher, or the TUNE/TRACK ( ) button (7b) to tune the radio lower. The radio will seek the next strong station and stop. Manual Tuning To manually seek a specific station, first press and hold either the up or down TUNE/TRACK button until "MANU" appears on the display. Press the up or down TUNE/TRACK buttons momentarily to tune two frequency steps at a time. 9 FM Mono Select (MON) During FM radio operation, the MON button (9) is used to select monaural or stereo reception of the broadcast signal. Under normal reception conditions, the unit should be left in the stereo mode (indicated by "ST" when tuned to an FM stereo signal). If the signal is too noisy for comfortable listening, press the MON button; the "ST" indication will disappear from the display panel and "MONO" will appear. To return to stereo reception mode, press the button again. 10 Auto-Store / Pre-Set Scan Tuning (AMS) Press the AMS button (10) momentarily to scan the 6 stations in the pre-set memory for all FM bands. The unit will stop at each pre-set station for 10 seconds. Press AMS again to stop scanning and select the current frequency. Press the AMS button for more than 2 seconds to activate the Auto-Store Tuning feature. The radio will automatically scan the band in use and enter strong stations into the pre-set memory positions for that band. Auto-Store will erase any stored stations. If no further tuning is performed after five seconds, "AUTO" will appear momentarily on the display and tuning will revert to the original tuning mode. 8 Audio Mute (MUT) Press the MUT button (8) to silence the volume from the system. "MUTE" will appear on the display panel. Press MUT again (or activate another function) to return the volume level to the setting that was in use before the Mute function was activated. 7b 7a RELEASE EJECT / PWR UCD200 MON 9 EQ AUDIO DISP TUNE TRACK LOU BAND SEL AM / FM / CD RECEIVER MUT AMS 1 2 SCN 3 RPT 4 RDM 5 6 MODE 10 8 9