Jensen UV8 Instruction Manual - Page 8

CONTROLS AND INDICATORS Button Operation 1. OPEN Press to activate the automatic mechanical system and move the TFT monitor into viewing position. Press again to close the TFT. 2. WIDE/DISP Press to adjust the display aspect of the picture to one of two settings: Full or Normal. With the monitor closed, press the DISP button to cycle through information available on the LCD screen. 3. PIC/AS/PS Press to adjust the Brightness and Contrast. Press the VOL button (5) to move between Brightness to Contrast. Turn the rotary encoder (5) to adjust the setting for the selected option. With the monitor closed, press AS/PS to automatically store strong radio stations in the six preset channels in the current band. 4. TILT/BAND Press to activate the tilt function. Use the joystick to make adjustments while the yellow icon is flashing. Press once to adjust the downward tilt angle of the screen one step at a time or press and hold to adjust the angle in a continuous motion. With the monitor closed, press the BAND button to change the AM or FM band. 5. VOL (LO/DX) Rotate to adjust the volume. Press and release to enter and/ or confirm audio settings. Press and hold to activate the Local (LOC) setting. 6. SRC Press to turn unit on. Press and hold to turn the unit off. When on, press once to select playing mode. 7. LCD Display 8. MUTE Press to silence the receiver. Press again to resume previous volume level. 5 4 3 TILT PIC NOTE: The UV8 features Softmute, which will allow the volume to increase or decrease gradually when the MUTE function is activated or deactivated. 69 7 4 2 1 UV8 WIDE CLOSE 17 16 15 14 13 8 10 11 12