Karcher FP 303 Operating instructions - Page 12

Complete care It is recommended to perform the complete care 2 to 3 times per year. Remove the dirt from the floor  Sweep, vacuum or wipe the floor or floor covering with a moist rag if necessary. Applying care products  Use a mop to distribute the care product evenly on the floor. Let dry completely Notes: Please observe the instructions for use of the flooring and care product manufacturers! Do not use care products containing solvents. Polishing Illustration  Drive across the surface multiple times as shown in the illustration until the desired shine is achieved. Always move the appliance while it is running. Do not stay in one place for extended periods, because this could cause damages to the flooring. Note: Observe the manufacturer's instructions regarding when to walk on the floor or move furniture, etc. We recommend waiting at least 12 hours. During this period, only walk on the surface carefully and not in street shoes. Do not move any furniture and do not apply water to the floor. Maintenance care We recommend performing the maintenance care procedures once per month to achieve an evenly distributed shine.  Depending on the manufacturer, the care product can be poured directly into the cleaning water. Please observe the instructions for use of the flooring and care product manufacturers!  Then polish the surface. Intermediate care  Depending on the requirements and the use of the floor (foot marks, streaks...), the care coat can be polished multiple times without the need of applying new care products to the floor. Finish operation  Bring the strut back to a vertical position. Appliance switches off. Illustration  Remove the mains plug and wrap it around the hook provided at the strut. First turn the upper cable hook upwards. Transporting the appliance Ensure that the appliance moves on the transport wheels while transporting it from one room to another or moving it to its storage location. Illustration  For this, press handle backwards and pull the appliance. Storing the Appliance We recommend activating the transport lock if the appliance will not be used for extended period of time. Illustration  Place the appliance on the floor so that the polishing head is positioned perpendicular to the surface.  Remove the pad holder from the appliance and place it into the storage compartment.  Press the transport lock into the intake of the pad holder on one side and hold it there. Firmly press the other side of the transport lock into the intake of the second pad holder and lock into place.  Store the appliance upright in a dry room. 12 EN - 6