Kenmore 2621 Owners Manual - Page 11

CLEANING AREA ATTACHMENT Between Furniture* Cushions* Drapes* Stairs Bare Carpeted Floors FloorstRugs Walls Combination Brush 4 ,/ / # Crevice Tool # 4 Floor Brush 4 4 4 Power-Mate ® Handi'Mate Jr.®*** ,/ Power-Mate Jr2*** / 4** 4 4 4 * Always clean attachments before using on fabrics. ** 2-position switch should be in FLOOR position. *** Some models; Handi-Mate Jr. ® and Power-Mate Jr. ® attachment with the products. instructions are included NOTE: When separating wands, depress lock button completely before pulling wands apart. If wand lock button is difficult to depress, push the two wands more tightly together to line up the lock button with the hole. Depress lock button and then pull wands apart. OVERLOAD PROTECTOR The Power-Mate ® has built-in Overload Protector protection against motor and belt damage should the agitator jam. If the agitator slows down or stops, the overload protector shuts off the Power-Mate ®. The canister motor will continue to run. To correct problem: Turn off and unplug vacuum cleaner, remove obstruction, then press overload protector reset button. If the problem persists, have the vacuum cleaner serviced by a Sears or other qualified service agent, WARNING EDGE CLEANER Active brush edge cleaners are on both sides of the PowerMate ®. Guide either side of the PowerMate ®along baseboards or next to furniture to help remove dirt trapped at carpet edges. SUCTION CONTROL The suction control allows you to change the vacuum Suction Suction cleaner suction for different fabric and carpet weights. Opening the control decreases suction for draperies and lightweight rugs, while closing the control increases suction for upholsteries and carpets. 11