Kenmore 2718 Use and Care Guide - Page 10

To remove block-out keys, pull straight up. NOTE: Be sure block-out keys and/or dime inserts are seated properly and ratchet dog is in place with irs spring connected (see FIGURE8). Be sure the proper coin sizing block is in place. STEP7 Replace coin receiver block into slide: • Hold coin receiver right side up in the palm of one hand. • Lower coin slide until coin receiver block fits into the coin slide cavity. CAUTION: Do not dislodge ratchet dog and spring. Block-Out Keys Ratchet Dog and FIGURE 8 Change coin sizing block: • Remove two screws that hold upper coin chute cover. Remove cover (see FIGURE9). (2) Upper Coin Chute Cover Anti-Cheat Gate • Hold coin receiver block in place with your fingers and turn slide upside down. • Insert and tighten screw. STEP8 Install slide into coin chute. Slide can only be pushed in if the anti-cheat gate in flange is pushed to the left. (see FIGURE9). STEP9 Replace coin slide stop with two screws. Replace coin slide return spring. Replace coin slide extension with two screws (be sure spacers are in place). STEP10 Replace coin slide mechanism in meter case. Replaceand tighten coin slide mounting bolt. NOTE: It may be easier to insert coin slide mounting bolt if you remove the timer from the mounting screws temporarily. REPLACEMENT PARTS Block Screws (2) Coin Sizing_ Coin Sizing Block • Remove two screws that hold coin sizing block to upper coin chute cover cover (see FIGURE10). • Put new coin sizing block in place. Reinsert and tighten mounting screws. • Replace coin chute cover. Reinsert and tighten screws. If replacements parts are needed for your washer, call Sears Parts and Service Toll Free Number 1-800-4-MY-HOME (1-800469-4663). For coin box parts, call 1-800-221-0982, Greenwald Industries. Destroy the carton and plastic bags after the washer is unpacked. Children might use them for play. Cartons covered with rugs, bedspreads, or plastic sheets can become airtight chambers causing suffocation. Place all materials in a garbage container or make materials inaccessible to children. The instructions in this manual and all other literature included with this washer are not meant to cover every possible condition and situation that may occur. Good safe practice and caution MUSTbe applied when installing,operating and maintaining any appliance. Maximum benefits and enjoyment are achieved when all the Safety and Operating instructions are understood and practiced as a routine with your laundering tasks. 10