Kenmore 27514 Owners Manual - Page 8

CANISTER 1, Open the canister hood, 2. Check to see that the dust bag is properly installed, See BAG CHANGING for instructions,, 3, Check to see that the motor safety filter is properly installed See MOTOR SAFETY FILTER CHANGING for instructions. HOOD AND TOOL STORAGE COVER tt is normal for the canister hood and tool storage cover to come off when opened further than needed. Line up the hinge slots, insert the hinges into the slots, and close the hood and toot storage cover to reinstall, storage cover open. This will help to prevent damage from occurring to the canister hood and/or tool storage cover. HOSE 1, Line up the hose latch tab and notch in canister hood and insert hose into canister until it snaps in place To remove: Lift hose latch tab upward and pull up on hose, Lock Button Handle Quick Hose Latch Tab Notch 2. Insert handle into wand until lock button snaps in place, Be sure hose is not twisted. M To remove: Press handle quick release button and pull up on handle, To store: Disconnect hose from wands and canister to prevent stress on hose during storage, Store hose in a loosely coiled position so the hose covering is not stressed. This canister is equipped with an on-board storage area for a Pet PowerMate attachment "To Install: Open the Pet PowerMate storage cover. Insert the Pet PowerMate, press down into place, and close the lid securely To Remove: Open the storage cover Remove Pet PowerMate from the storage area and use as needed (see ATTACHMENTS and ATTACHMENT USE TABLE), Pet PowerMate Storage Cover /