Kenmore 2803 Use and Care Guide - Page 15
Lid Lock, Estimated, Remaining, NOTES, Preset, Cycle, Settings, To use, preset, cycle, settings,
View all Kenmore 2803 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
These lights show which portion of the cycle the washer is operating. They also indicate when you can add other garments to the wash load. STATUS AddAGarmen0t Soak ( Wash, Rinse, Spin, ClothesCleanl UdLock@ Clothes Clean The Clothes Clean light stays on until the lid is opened or the Stop or Power button is pressed. Lid Lock When the Lid Lock status light glows, the washer lid is locked. NOTE: • You must wait until the Lid Lock light turns off before the lid can be opened. Indicator lights An indicator light shows which Cycle, Modifiers and Options you have selected. Estimated Time Remaining Cycle time in minutes will appear in the display while you are making selections. The total cycle time will appear, including an estimated time for drain and fill times, once Start is pressed. NOTES: • The time is an estimation only and may vary depending on load size, cycle, modifiers and options selected. • You may notice the time adjusting during the cycle. This is normal. • The cycle time may be extended if oversudsing occurs or the load is unbalanced. Turn the knob to choose the right wash cycle for the type of fabrics you are washing. When the knob points to a cycle, the indicator light for the cycle will glow. If the default settings for the Modifiers and Options are suitable for your wash load, you may press Start to begin the wash cycle. Casual/ Wrinkle Free t Darks / Colors Normal,__ Heavy.,._l_. Whitest S _ Whites Preset Cycle Settings For ease of use, preset cycle settings provide the recommended fabric care settings for each cycle. To use the preset cycle settings: 1. Press POWER. 2. Select the cycle you want by turning the knob. The preset cycle settings will be displayed (see following chart). NOTE: The times listed in the Preset Cycle Settings chart are estimates. Preset cycle times may vary slightly depending on your model. 3. Press START. The wash cycle will begin. Preset Cycle Settings Cycle Preset Minutes Soil Level* Wash/Rinse Temp Whitest Whites 74 Heavy Hot/Cold (No ATC) Heavy Duty Normal 77 Heavy Hot/Cold (No ATC) 47 Normal Warm/Cold Casual/Wrinkle Free 46 Medium Warm/Cold Darks/Oolors 43 Normal Cool/Cold Delicate 35 Medium Warm/Cold Ultra Nandwash 35 Light Cool/Cold Drain & Spin 15 Not Not applicable applicable *Cycle time in minutes will appear in the display while you are making selections. The total cycle time will appear, including an estimated time for drain and fill times, once Start is pressed. NOTE: Load only to the top of the stainless steel basket. Overloading can cause poor cleaning. See "Starting Your Washer." 15