Kenmore 2803 Use and Care Guide - Page 17
Water, Level
View all Kenmore 2803 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Water Level This washer automatically selects Auto for the water level when the cycle is selected. The Auto feature senses the size of the load and adds the correct amount of water for the load size. You can also manually change the water level settings. Auto King Plus _i:::M:_edium Small Water Level Wash/Rinse Temp Select a water temperature based on the type of load you are washing. Use the warmest wash water safe for fabrics. Follow garment label instructions. Warm rinses leave the loads drier and more comfortable to handle. However, warm rinses may increase wrinkling. Cold rinses may help with wrinkling and save energy. A_m TempControl Hot / C01d ; Warm / Cold i ii Cool / Cold i Cold/ Cold Wash I Rinse Temp Temperature Guide Wash Water Temperature Hot Warm Cold Suggested Fabrics Whites and pastels Bright colors Darker colors that bleed or fade NOTE: In wash water temperatures colder than 60°F (15.6°C), detergents do not dissolve well. Soils may be difficult to remove. Auto Temp Control Auto Temp Control (ATC) electronically senses and maintains a uniform wash and rinse water temperature. ATC regulates incoming hot and cold water. The ATC is automatically turned On when a cycle is selected. (See "Preset Cycle Settings" in "Cycles.") ATC is available with Warm/Warm, Warm/Cold and Cool/Cold settings. The water temperature in the Hot/Cold and Cold/Cold settings depend on the water temperature at the water inlet faucets. • ATC ensures consistent cleaning. • Heated water consumes the largest amount of energy that a washer uses. • Today's detergents work well at temperatures above 60°F (15.6°C), Delay Start You can use the Delay Start feature to delay the start of a wash cycle for up to 9 hours (depending on your model). 1. Load the washer and fill the dispensers. 2. Close the washer lid. 3. Press POWER. 4. Select the desired Cycle, Modifiers and Options, 5. Press DELAY START. 1H (one hour) will be displayed in the time display window, The indicator light for Delay Start will glow. G Delay Star 6, For a longer delay time, press Delay Start. The Start time will increase by 1-hour steps. 7. Press START. The countdown to the wash cycle will show in the time display window and the Delay Start indicator light will begin to flash. NOTE: The Start indicator light will not flash when Delay Start is chosen. You must press Start to initiate a countdown for the cycle to begin. To change the Delay Start time: • PressSTOR • Press DELAY START to select the desired delay time. • Press START to begin the countdown. To cancel Delay Start: Press START again to begin the cycle right away, or press STOP twice to cancel the cycle. 17