Kenmore 4689 Use and Care Guide - Page 20
turnWa;m, &HoldOFFatany, timepress, TheWarmHold, indicator, light, above, thepadwill, turnOFF.
View all Kenmore 4689 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Setting Oven Controls (cont'd) Setting the Warm & Hold TM Feature The ....... p ad turns ON the Serve Warm & Hold feature and will maintain an oven temperature of 170°F (77°C). The Warm & H01d feature will keep oven baked foods warm for serving up to 3 hours after cooking has finished. After 3 hours the Warm & Hold feature will shut the oven OFF automatically. The Warm & Hold feature may be used without any other cooking operations or can be set to turn ON automatically after cooking has finished using TIMED BAKE or DELAY START BAKE. To set Warm & Hold: 1. Arrange interior oven racks and place baked food in oven. If the food is already in the oven go to step 2. 2. Press will appear in the display and the Warm & Hold indicator light above the pad will turn ON. Note: If no further pads are touched within 6 seconds the request to turn ON Warm & Hold will be cleared. 3. Press A or V to start. 4. To turn Warm & Hold OFF at any time press (',T_,'_T. he Warm & Hold indicator light above the pad will turn OFF. To set Warm & Hold to turn ON automatically: 1. Arrange interior oven racks and place food in oven. Set the oven properly for Timed Bake or Delay Start Bake. 2.. Press " "will appear in the display and the Warm & Hold indicator light above the pad will turn ON. 3. ToturnWa;m&HoldOFFatanytimepress TheWarmHoldindicatloigrhat bovtehepadwiltlurnOFF. _'__C/ Adjusting the Oven Temperature Your oven temperature control has been precisely set at the factory. This setting may differ from your previous oven, however, so your recipe times may not give you the results you expect. If you think that the oven is cooking too hot or too cool for your recipe times, you can adjust the control so that the oven cooks hotter or cooler than the temperature displayed. To Adjust Oven Temperature: 1. Press B_. 2. Set the temperature to 550°F (287°C) by pressing and holding the A. 3. Within 2 seconds, press and hold B_ke until the 2 digit display appears. Release The display now indicates the amount of degrees offset between the original factory temperature setting and the current temperature setting. If the oven control has the original factory calibration, the display will read "0". 4. The temperature can now be adjusted up or down 35°F or lg°c, in 5°F or 1°C steps by pressing and holding the A or V. Adjust until the desired amount of offset appears in the display. When lowering the oven temperature, a minus sign (-) will appear before the number to indicate that the oven will be cooler by the displayed amount of degrees. 5. When you have made the desired adjustment, press (_T_o_to go _ZY back to the time of day display. Note: Oven temperature adjustments made will not change the Self-Cleaning feature temperature. 20