Kenmore 6929 Use and Care Guide - Page 11

REVERSE FREEZER DOOR ° Gently pry off the Top Hinge Cover with a flat head screwdriver and remove (see Fig.13). Fig. 13 • Move the Hinge Pin insert Bracket to the other side of the door, keeping the same orientation, and move the Hinge Pin insert into the hole on the left side of the bracket (Fig. 17). Fig. 17 i_ Hinge PHiningtnesePrtin insert Bracket Using 10mm or 13/32-inch socket wrench, remove the 3 bolts and lift off the Top Hinge (see Fig. 14). Set parts aside. Fig. 14 Top Hinge Reverse Door Closer/Stop by flipping over (see Fig. 18), place on top of Hinge Pin insert Bracket, and tighten both down with the screw. Fig. 18 (_ Lift up door slightly and remove it (Fig. 15). Fig. 15 Middle Hinge Bracket _ Hinge Pin Turn freezer door upside down on a non-scratch surface and loosen the screw to remove Door Closer/Stop and Hinge Pin insert (see Fig. 16). Fig. 16 Door Closer / Stop • Pry off cover on top of refrigerator on left side to uncover screw holes (Fig. 19). • Set freezer door and Top Hinge parts to the side and remove refrigerator door. Fi- 1_' Y" _ -- Cover (on top of _ i refrigerator) & 11