Kenmore 7703 Use and Care Guide - Page 18

Timed Cycle Modifiers Use the Temperature Modifier to select temperatures for the Timed Cycles. Press Temperature until the desired temperature setting illuminates. NOTE: Temperature modifiers cannot be used with the Auto Dry Cycles. High Medim Low ExtlaLow Air lily Temperature yoJusfs lIMED Cy(,#5 oNiY Air Dry Use the Air Dry Modifier for items that require drying without heat such as rubber, plastic and heat-sensitive fabrics. This table shows examples of items that can be dried using Air Dry. Type of Load Time* (Minutes) Foam rubber - pillows, padded bras, stuffed toys 20 - 30 Plastic - Shower curtains, tablecloths 20 - 30 Rubber-backed rugs 40 - 50 Olefin, polypropylene, sheer nylon 10 - 20 *Reset cycle to complete drying, if needed. When using Air Dry • Check that coverings are securely stitched. • Shake and fluff pillows by hand periodically during the cycle. • Dry item completely. Foam rubber pillows are slow to dry. NOTE: Air Dry is not available with Auto Dry Cycles. You can customize your cycles by selecting options. OPTIONS Q Damp Dry Signal AUlOC_CSLOL¥ Wrinkle Guard 60 Damp Dry Signal Select the Damp Dry Signal to alert you that your clothes are approximately 80% dry or suitable for ironing. This is useful when you want to remove lightweight items in a mixed load to avoid overdrying or remove partially dry items that may need ironing. The DAMP DRY SIGNAL is usdul when drying bedsheets/linens in a mixed load. When the signal goes off, open the door to stop the dryer, rearrange the load inside the dryer, close the door and restart the dryer to finish the drying cycle. Rearranging the load will aid in the drying process. NOTE: The Damp Dry Signal is available only with the Auto Dry Cycles. WRINKLE GUARD _ (30, 60, 90, 150 minutes) WRINKLE GUARD ®helps smooth out wrinkles that may form when clothes are not removed promptly at the end of a cycle. During this option, the dryer stops tumbling and then tumbles again for a brief period without heat when WRINKLE GUARD®is pressed. • Press WRINKLE GUARD ®to get heat-free, periodic tumbling at the end of a cycle. WRINKLE GUARD ® periodically starts and stops the dryer, tumbling the load without heat for 30, 60, 90 or 150 minutes (depending on your model) unless you open the dryer door. • Stop WRINKLE GUARD ® at any time by pressing WRINKLE GUARD ®, opening the dryer door or pressing STOR • For the Casual Cycle, WRINKLE GUARD ® is preset to ON. The other Auto Dry Cycles will retain the WRINKLE GUARD ® setting. For example, if you select WRINKLE GUARD ® in the Normal cycle, WRINKLE GUARD ®will be on the next time you select the Normal cycle. NOTE: If you do not select WRINKLE GUARD ®, the dryer stops after cool down. Cycle Signal The Cycle Signal produces an audible sound when the drying cycle is finished. Promptly removing clothes at the end of the cycle reduces wrinkling. Press CYCLE SIGNAL to turn the Cycle Signal On or Off. On Off Cycle Signal NOTE: When WRINKLE GUARD _ is selected, a tone sounds every 5 minutes until the clothes are removed, or WRINKLE GUARD ® ends. You can change Auto and Timed Cycles, Modifiers and Options anytime before pressing Start. • Three short tones sound if an unavailable combination is selected. The last selection will not be accepted. Changing Cycles after pressing Start 1. Press STOP twice. 18