Kenmore 7817 Use and Care Guide - Page 10

To Reverse - parts

Get Kenmore 7817 - 20.6 cu. Ft. Top Freezer Refrigerator PDF manuals and user guides View all Kenmore 7817 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

TO ATTACH FREEZER HANDLE: 1. Place rounded part of handle onto shoulder screw on face of door and align the 2 holes in bottom of handle with the 2 holes in bottom of door. Handle should be mounted with set screw facing towards center of door.Do not tighten the set screw yet. . Install the 2 screws into the bottom of the handle. 3. Tighten the set screw on the rounded part of the handle until the handle is flush with the door, then tighten another 1/2 turn. TO ATTACH REFRIGERATOR HANDLE: 1. Place rounded part of handle onto shoulder screw on face of door and align the 2 holes in top of handle with the 2 holes in top of door. Handle should be mounted with set screw facing towards center of door. Do not tighten the set screw yet. . Install the 2 screws into the top of the handle. 3. Tighten the set screw on the rounded part of the handle until the handle is flush with the door, then tighten another 1/2 turn. TO REVERSE REFRIGERATOR/FREEZER HANDLES: Handles may be easier to reverse while doors are off. Reverse freezer and refrigerator handles as shown. Handle Reversal 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
TO
ATTACH
1.
.
3.
FREEZER
HANDLE:
Place rounded part of handle onto shoulder screw on
face of door and align the 2 holes in bottom of handle
with the 2 holes in bottom of door. Handle should
be
mounted
with
set screw
facing
towards
center
of
door.Do
not tighten
the set screw
yet.
Install the 2 screws into the bottom of the handle.
Tighten the set screw on the rounded
part of the
handle until the handle is flush with the door, then
tighten another 1/2 turn.
TO
ATTACH
1.
.
3.
REFRIGERATOR
HANDLE:
Place rounded part of handle onto shoulder screw on
face of door and align the 2 holes in top of handle with
the 2 holes in top of door. Handle should
be mounted
with
set screw
facing
towards
center
of door. Do
not tighten
the set screw
yet.
Install the 2 screws into the top of the handle.
Tighten the set screw on the rounded part of the
handle until the handle is flush with the door, then
tighten another 1/2 turn.
TO REVERSE
REFRIGERATOR/FREEZER
HANDLES:
Handles may be
easier
to reverse while doors are off.
Reverse freezer and refrigerator handles as shown.
Handle
Reversal
10