Kenmore 7840 Use and Care Guide - Page 16

SETTING THE CONTROLS Temperature • Your refrigerator has a control pad on the dispenser that lets you regulate the temperature in the freezer and refrigerator compartments. • Initially set the refrigerator control at 37 °F (3 °C) and the freezer control at 0 °F (-18 °C). Leave it at this setting for 24 hours (one day) to stabilize. Then adjust the compartment temperature as desired. Filter • Filter Reset : When the FILTER RESET icon turns on, you have to change the water Iter. Press the FILTER RESET button for 3 seconds to turn the icon o. You need to change the water Iter approximately every 6 months. WARNING: If a door is open, the dispenser will not work. Light • The dispenser lighter is ught(oOFF) after applying the power, and when you press this button, the dispenser light is ug.,t(ON). • Every time you press the freezer temperature adjust button, the temperature changes in a circulating order of "0", "-1", "-2", "-3", "-4", "-6", "8", "6", "5", "4", "3", "2", "1", "0". • Every time you press the refrigerator temperature adjust button, the temperature changes in a circulating order of "37", "36", "35", "34", "33", "46", "45", "44", "43", "42", "41", "40", "39", "38", "37". Ultra Ice ° When you press the "Ultra Ice" button, the graphic [ 0 ] will light up in the display and it continues for 24hours. It will automatically shut o after 24hours have passed. Or you can stop this function manually by pressing the button one more time. • This function increases both icemaking and freezing capabilities. Dispenser • You can select water, crushed ice, or cubed ice by pressing O button as you desire. • There could be some dripping after dispensing. It is recommended to hold your cup for a couple of seconds after dispensing. NOTE : The dispenser is desinged not to operate while either refrigerator door is left open. Alarm • When the power is connected to the refrigerator, door alarm is initially set ON and door alarm display will show A.a,m(ON). When you press _ button the display will change to o Alarm (OFF) and door alram function is now activated. • When either refrigerator or the freezer door is left open for more than 60 seconds, the alarm will ding to let you know the door is open. • When you close the door, the door alarm will stop dinging. • If you want to disable the door alarm function, press _ button then the door alarm display will switched to A_a,mo (OFF). Lock • When the power is initially connected to the refrigerator, Lock function is o. • If you want to activate Lock__functionto lock other buttons, press and hold _ button for 3 seconds or more. Lo;k(ON) sign will be displayed and the Lock function is now enabled. • No buttons other than ..... button will work even including dispenser button while Lock function is enabled. • To disable the Lock function, press and hold _ button for 3 seconds or more. Temperature Mode Switch Function(°F °C) • If you want to convert °F to °C or vice versa, press and hold O button and _ button simultaneously for 5 seconds or more. 16