Kenmore 7873 Use and Care Guide - Page 26

INSIDE WALLS, to warm up so, cloth won't stick - stainless

Page 26 highlights

CONDENSER COILS Remove Back cover. Use a vacuum cleaner with an extended attachment to clean condenser coils. Vacuum coils when dusty or dirty. Coils may need to be cleaned as often as every other month. Explosion Hazard Use non-flammable cleaner. Failure to do so can result in death, explosion, or fire. LIGHT BULB REPLACEMENT Both the refrigerator and freezer sections defrost automatically. However, clean both sections about once a month to prevent odors. Wipe up spills immediately. GENERAL CLEANING TIPS Electric Shock Hazard Before replacing a Compartment Lamp, either unplug the refrigerator or turn off power at the circuit breaker or fuse box. • Unplug refrigerator or disconnect power. • Remove all removable parts, such as shelves, crispers, etc. Refer to sections in Using Your Refrigerator for removal instructions. • Use a clean sponge or soft cloth and a mild detergent in warm water. Do not use abrasive or harsh cleaners. • Hand wash, rinse and dry all surfaces thoroughly. • Plug in refrigerator or reconnect power. OUTSIDE Waxing external painted metal surfaces helps provide rust protection. Do not wax plastic parts. Wax painted metal surfaces at least twice a year using appliance wax (or auto paste wax). Apply wax with a clean, soft cloth. For products with a stainless steel exterior, use a clean sponge or soft cloth and a mild detergent in warm water. Do not use abrasive or harsh cleaners. Dry thoroughly with a soft cloth. NOTE: Moving the control to the OFF position does not remove power to the light circuit. NOTE: Some models have LED interior lighting and service should be performed by a qualified technician. To change Refrigerator Compartment Lamp 1. Unplug Refrigerator, or disconnect power at the circuit breaker. 2. Release 2 screws. 3. Hold both ends with your both hands and pull it downward to remove it. INSIDE WALLS (allow freezer to warm up so cloth won't stick) To help remove odors, you can wash the inside of the refrigerator with a mixture of baking soda and warm water. Mix 2 tablespoons baking soda to 1 quart of water (26 g soda to 1 liter water.) Be sure the baking soda is completely dissolved so it does not scratch the surfaces of the refrigerator. & CAUTION: While cleaning the inside, DO NOT spray water on surfaces. DOOR LINERS AND GASKETS Do not use cleaning waxes, concentrated detergents, bleaches, or cleaners containing petroleum on plastic refrigerator parts. • When you are finished, reconnect the refrigerator to the electrical source and reset the controls (Thermostat, Refrigerator Control, and or Freezer Control, depending on the model) to the desired setting. PLASTIC PARTS (covers and panels) Do not use window sprays, abrasive cleansers, or flammable fluids. These can scratch or damage the material. 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116

Explosion
Hazard
Use non-flammable
cleaner.
Failure to do so can result in death, explosion,
or fire.
Both the refrigerator
and freezer sections
defrost
automatically.
However, clean both sections
about once
a month to prevent odors. Wipe up spills immediately.
GENERAL
CLEANING
TIPS
• Unplug refrigerator
or disconnect
power.
• Remove
all removable
parts, such as shelves, crispers,
etc. Refer to sections
in Using Your Refrigerator
for
removal instructions.
• Use a clean sponge or soft cloth and a mild detergent
in
warm water. Do not use abrasive or harsh cleaners.
• Hand wash, rinse and dry all surfaces thoroughly.
• Plug in refrigerator
or reconnect power.
OUTSIDE
Waxing external painted metal surfaces helps provide rust
protection. Do not wax plastic parts. Wax painted metal surfaces
at least twice a year using appliance wax (or auto paste wax).
Apply wax with a clean, soft cloth.
For products with a stainless steel exterior, use a clean sponge
or soft cloth and a mild detergent in warm water. Do not use
abrasive or harsh cleaners. Dry thoroughly with a soft cloth.
INSIDE WALLS
(allow
freezer
to warm up so
cloth won't stick)
To help remove odors, you can wash the inside of the
refrigerator with a mixture of baking soda and warm water.
Mix 2 tablespoons baking soda to 1 quart of water (26 g soda
to 1 liter water.) Be sure the baking soda is completely
dissolved so it does not scratch the surfaces of the
refrigerator.
&
CAUTION:
While cleaning the inside, DO NOT spray water
on surfaces.
DOOR
LINERS
AND
GASKETS
Do not use cleaning waxes, concentrated
detergents,
bleaches, or cleaners
containing
petroleum on plastic
refrigerator
parts.
PLASTIC
PARTS
(covers
and
panels)
Do not use window sprays, abrasive cleansers, or flammable
fluids. These can scratch or damage the material.
26
CONDENSER
COILS
Remove Back cover.
Use a vacuum cleaner with an
extended attachment
to clean
condenser
coils. Vacuum
coils
when dusty or dirty. Coils may
need to be cleaned as often as
every other month.
LIGHT
BULB
REPLACEMENT
Electric
Shock
Hazard
Before replacing a Compartment
Lamp, either unplug
the refrigerator
or turn off power at the circuit
breaker
or fuse box.
NOTE:
Moving the control to the OFF position
does not remove power to the light circuit.
NOTE: Some models have LED interior lighting and service
should be performed by a qualified technician.
To change
Refrigerator
Compartment
Lamp
1. Unplug Refrigerator, or disconnect power at the circuit
breaker.
2. Release 2 screws.
3. Hold both ends with your both hands and pull it downward
to remove it.
• When you are finished, reconnect the refrigerator to the
electrical source and reset the controls (Thermostat,
Refrigerator Control, and or Freezer Control, depending on
the model) to the desired setting.