Kenmore 7901 Use and Care Guide - Page 21

DAIRY BiN AND CAN RACK The dairy bin/can rack can be relocated to another position. 1. To remove the dairy bin / can rack simply lift up and pull out. 2. To replace the dairy bin / can rack slide it in above the desired support slots and push down until it stops. How to change the water filter 1. Remove the old cartridge Place a container under the harder. NOTE: When filter is being removed, water drains through the hole. '_ _L _ ..... ...... __ \ -- " " _o Dairy Bin Can Rack iCE TRAY (on some models) Icemaklng * Pour water to the level indicated in the picture. Do not overfill with water, or ice cubes will be difflcuit to remove. " For wuick freeze, adjust the freezer dial to 3. To remove ice cubes, twist the tray. * Do not bend the ice tray. Doing so may result in damage to the tray. * To remove ice cubes easily, pour water on the back of the tray or soak it in water before removing ice cubes. clockwise. Rotate the knob of the cartridge counter Pull out the cartridge. 2. Replace with a new cartridge. Take the new cartridge out of its packaging and remove protective cover from the o-rings. With cartridge knob in the vertical position_ push the new filter cartridge into the cover until it stops. _ Push it in firmly until you can turn it. Using its handle_ twist cartridge about 1/4 turn. FILTER It is recommended that you replace the filter when the water filter indicator light turns on or ice maker decreases noticeably. You wiii hear a snap when it clicks into place. After changing the water filter cartridge, reset the water filter status display and indicator light by pressing and holding the button for 3 seconds. After installing water filter: 1. Turn on household water supply. 2. Dispense 2.5 gallons (9.46L) of water to purge the system_ depressing and releasing the dispenser button (30 seconds ON, 60 seconds OFF). Open the refrigerator door and shelf area to check for water leaks. To purchase replacement water filter° call 1-800-4-MY-HOME . 22