Kenmore 9991 Use and Care Guide - Page 20

General Cleaning FEATURE OVERVIEW , To Remove and Replace Oven Door , Removable Outer Door Glass Panel To Remove and Replace Oven Door I. Open the door to the fully opened position. 2. Pull up the lock located on both hinge supports and engage it in the hinge levers. You may have to apply a little downward pressure on the door to pull the locks fully over the hooks. 3. Grab the door by the sides, pull the bottom of the door up and toward you to disengage the hinge supports. Keep pulling the bottom of the door toward you while rotating the top of the door toward the range to completely disengage the hinge levers. 4. To replace the door, reverse the door removal steps. Make sure the hinge supports are fully engaged before unlocking the hinge levers. The door is heavy. After removing door, lay it flat on the floor with the inside of the door facing down. Lock in normal position Lock engaged for door removal HINGE SLOT Door removed from the range Removable Outer Door Glass Panel Applicable only to models with an external glass panel not held with a frame. This design allows you to clean the inside face of the exterior door panel as well as the hidden face of the door inner glass. To Remove the External Door Glass Panel: 1. Remove the door as shown above and lay the door flat. 2. Using a screwdriver, remove the 5 screws fastening the metal glass support rail to the underside of the door. Remove the support rail. 3. Grasp both sides of the glass panel and slowly pull it out of the door upper molding. Lay the glass flat. To Replace the External Door Glass Panel: 1. Grasp the sides of the glass panel and carefully insert the glass into the door top moulding. 2. Replace the support rail and the 5 locking screws. 3. Replace the door onto the range. Handle the glass panel with care. When dropped on a corner, the glass panel may shatter. 20