Kenwood CD-203 User Manual - Page 14

Programmed play (PGM mode) Use the following procedure to program desired tracks in a 14 desired order. (up to 32 tracks) Preparation ÷ Load a disc in the CD player. CD-206/204/203/DPF-R6010/R4010/R3010 (En) Hereafter the illustration of the common parts on the front panel is of CD-206/DPF-R6010. REMOTE CONTROL UNIT RC-P0601 : Keys and controls used in the operations described on this page. 1 Press so that the "PGM" indicator lights. Do this operation in the stop mode. P.MODE 2 Program desired tracks. 1 Select the disc. DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 Go to step 2 within 8 seconds. 2 Select the desired track No. Main unit Remote control unit 1 2 3 4 ¢ 4 5 6 7 8 9 0 +10 Go to step 3 within 8 seconds. 3 Set the entry. P.MODE 4 Repeat steps 1, 2 and 3 above. 3 Start playback. 6 CD-206/DPF-R6010 PGM01 Blinks. DISC? CD-204/203/DPF-R4010/R3010 Light up. PGM 1 2 3 4 5 PGM01 D1 TNO.?? In the case of a CD-TEXT disc, the disc title is scrolled on the display. (CD-206/ DPF-R6010 only) Press the numeric keys as shown below.... To enter track No. 25 : 005 CD-206/DPF-R6010 PGM01 D1 TNO.25 « PGM01 ABCDEFGH In the case of a CD-TEXT disc, the track's title is scrolled on the display. PGM01 D1 TNO.25 CD-204/203/DPF-R4010/R3010 PGM 5 DISC REPEAT NO. TRACK NO. 1 1 2 3 4 5 25 P_ 01 Track number ÷ Tracks can also be selected by pressing the 4 or ¢ key. ÷ Up to 32 tracks can be programmed. When "FULL" is displayed, no more tracks can be programmed. ÷ If you make a mistake, press the CLEAR key and enter the track No. from the beginning. ÷ When the 4 or ¢ key is pressed during playback, the track will be skipped in the direction of the pressed button. ÷ When the 4 key is pressed once during playback, the play position returns to the beginning of the current track being played.