Kenwood CD-203 User Manual - Page 4

System connections 4 Caution: Do not plug in the power lead until all connections are completed. Make connections as shown below. When connecting the related system components, refer also to the instruction manuals of the related components. CD-206/DPF-R6010 : SL 16/XS8 switch 5 CD-206/204/203/DPF-R6010/R4010/R3010 (En) Malfunction of microcomputer If operation is not possible or erroneous display appears even though all connections have been made properly, reset themicrocomputer referring to "In case of difficulty". ∞ (COAXIAL) DIGITAL INPUT (OPTICAL) Digital component (MD, DAT, etc.) AC110-220V AC220-240V LINE OUTPUT @ SYSTEM CONTROL VARI ABLE ƒ L SL16 XS 8 R DIGITAL OUTPUT COAXIAL OPTICAL TEXT To wall AC outlet 75Ω coaxial cable with RCA PIN. (Commerciallyavailable) CD L R SYSTEM CONTROL DIGITAL INPUT COAXIAL OPTICAL Remove the protection cap when using the DIGITAL OUTPUT (OPTICAL) jack Commercially-available optical fiber cable Digital amplifier (or ordinary amplifier, receiver, etc.) CD-204/203/ DPF-R4010/R3010 : System control cord Audio cord To wall AC outlet AC 110-120V 2 3 AC 220-240V SYSTEM LINE OUTPUT CONTROL ƒ L SL16 XS 8 R SL 16/XS8 switch 5 Connection to digital amplifier or MD (CD-206/DPF-R6010 only) Connect the DIGITAL OUTPUT (OPTICAL or COAXIAL) jack to the digital input jack of the amplifier, DAT recorder, MD recorder, etc., using an optical fiber cable or coaxial cable which are commercially available in audio stores. ÷ When using an optical fiber cable to connect this unit to a digital amplifier, insert the plug straight into the jack until a snap sound is heard. ÷ Be careful not to bend, coil, or bundle the optical fiber cable. ÷ Optical fiber cables available on the market may not always be able to be used with this player. If your cord cannot be used with this unit, consult the store from which you purchased the cord or your nearest dealer. Optical fiber cable Notes 1. Connect all cords firmly. If connections are loose there could be loss of sound or noise produced. 2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging connection cords without removal of the power cord can cause malfunctions or damage to the unit.