Kenwood CMOS-740HD Instruction Manual - Page 8
Connections
View all Kenwood CMOS-740HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Connections CAUTION • If the engine key of your vehicle does not have the ACC position, branch the wire energized when the engine key is ON and connect it to the accessory power cord. • Before proceeding to connections, make sure that the engine key is not inserted and disconnect the (-) terminal of the battery to prevent the short-circuiting incident. • Do not bend the camera cord to a diameter of 40 mm or a radius of 20 mm or less. Basic Connections Connect to the rearview camera video input or to the external video input of the video monitor. Video cord Navigation system/Video monitor compatible with the HD camera picture quality (commercially available) Camera Connect the camera to the camera connection cord. Power cord Camera's cord length: 3.0 m (9.84 feet), Power cord: 6.0 m (19.69 feet)* * Including the power unit 1 4 Power unit Engine key Accessory power (ACC) Fuse (2A) Main fuse Battery Accessory cord (Red) Connect to the ON-OFF switchable power supply. Do not connect to a permanently ON power supply. Fuse GND cord (Black) Connect to a metallic part of vehicle (a part of chassis connected to the negative side of power supply). GND 8 | English