Kenwood DDX25BT Instruction manual - Page 48
<Smartphone Setup>, <Bluetooth Setup>, <OEM Setup>, <Beep>, <SETUP Memory>
View all Kenwood DDX25BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Settings Specify the connection method of Android/iPod/ iPhone. 1 Select the device type (1), then touch [Change] (2). Smartphone Setup Initial Information Device Type Connection Type Device Name iPod / iPhone Bluetooth Device Name Device Type Select iPod / iPhone Android / Other Change 2 Select the connection method (1), then confirm the selection ([OK] or [Next]) (2). If [iPod/iPhone] is selected in step 1: Smartphone Setup USB 1 Wire Bluetooth OK [USB 1 Wire] [Bluetooth] Select this when the device is connected via the USB input terminal (cable from the rear panel). Select this when the device is connected via Bluetooth. (Go to step 3.) If [Android/Other] is selected in step 1: Smartphone Setup Bluetooth Next The screen appears. Go to step 3. 3 When selecting [Bluetooth] as the connection method: Select the device (1), then press [OK] (2) to connect. • If the device is already connected, skip step 1. Paired Device List Device Name 1 Device Name 2 Device Name 3 Device Name 4 Device Name 5 OK Connection Remove Configure settings for using a Bluetooth device, such as connection and other general operations. For details, see "Bluetooth settings" on page 39. (Only for DDX395/DDX375BT) Get information, and change the settings for using the ADS adapter. • ON (Initial): Activates the key-touch tone. • OFF: Deactivates the key-touch tone. Memorize, recall, or clear the settings you have made. • The memorized settings are kept even when the unit is reset. Touch [Yes] to display the setting screen, then select an operation: • Recall: Recalls the memorized settings. • Memory: Memorizes the current settings. • Clear: Clears the currently memorized settings. • Cancel: Cancels. A confirmation message appears. Touch [Yes]. 46 ENGLISH