Kenwood DDX25BT Instruction manual - Page 8

Getting Started Setting the security function Registering a security code (Only for DDX418BT) 1 Display the Home screen. 2 Display the screen. On the Home screen, touch as follows: Then, on the screen, touch as follows: [System] → : [Set] 3 Enter a four-digit number (1), then confirm the entry (2). • To delete the last entry, touch [Clear]. • To cancel the setting, touch [Cancel]. 6 ENGLISH 4 Repeat step 3 to confirm your security code. Now, your security code is registered. To clear the registered security code: touch [CLR] for in step 2. Then, enter the current security code to clear and touch [Enter]. • When the unit has been reset or disconnected from the battery, you are required to enter the security code. Enter the correct security code, then touch [Enter]. Activating the security function You can activate the security function to protect your receiver system against theft. 1 Display the setting screen. On the Home screen, touch as follows: Clock settings 1 Display the Home screen. 2 Display the screen. On the Home screen, touch as follows: Then, on the screen, touch as follows: [System] → : [Enter] • You can also display the screen by touching the clock area on the Home screen. 3 Set the clock time. Clock Synchronize Radio Data System 2 Activate the security function. On the setting screen, touch as follows: [System] → : [ON] The security function is activated. The security indicator on the monitor panel flashes when the vehicle ignition is off. To deactivate the security function: Touch [OFF] in step 2. AM10 : 28 Reset E.g. Clock settings screen for DDX395 • Radio Data System: Synchronizes the clock time with FM RBDS. • OFF: Sets the clock manually. Touch [J]/[K] to adjust the hour, then minute. - Touching [Reset] will set the minute to "00".