Kenwood DDX418 Instruction Manual - Page 58

iPod/iPhone USB Bluetooth (only for DDX418/DDX4048BT ) Symptom Remedy/Cause Sound is distorted. Deactivate the equalizer either on this unit or the iPod/iPhone. A lot of noise is generated. No operations are available when playing back a track containing Artwork. Turn off (uncheck) the "VoiceOver" feature of the iPod. For details, visit . Operate the unit after the Artwork is loaded. (☞ page 20) "Reading..." keeps flashing on the Turn off the power and on again. screen. While playing a track, sound is The tracks are not properly copied into the USB sometimes interrupted. device. Copy tracks again, and try again. Phone sound quality is poor. • Reduce the distance between the unit and the Bluetooth mobile phone. • Move the car to place where you can get a better signal reception. The sound is interrupted or skipped while using a Bluetooth audio player. • Reduce the distance between the unit and the Bluetooth audio player. • Disconnect the device connected for Bluetooth phone. • Turn off, then turn on the unit. • (When the sound is not yet restored) connect the player again. The connected audio player cannot be controlled. Check whether the connected audio player supports AVRCP (Audio Video Remote Control Profile). Bluetooth device does not detect the unit. • Check whether the Bluetooth adapter (KS-UBT1) is inserted correctly. • Search from the Bluetooth device again. The unit does not make pairing Enter the same PIN code for both the unit and with the Bluetooth device. target device. If the PIN code of the device is not indicated on its instructions, try "0000" or "1234." Echo or noise occurs. Adjust the microphone unit position. The unit does not respond when You may have tried to copy the same entries (as you try to copy the phone book stored) to the unit. to the unit. 58 DDX418/DDX4048BT/DDX318/DDX3048