Kenwood DDX418BT Instruction Manual - Page 20

Radio [TI]*1 [MODE]*1 (For FM RDS features) Activates TI standby reception mode. • When TI is activated, the unit is ready to switch to traffic information if available. The TI indicator lights up in white. • If the TI indicator lights up in orange, tune into another station providing Radio Data System signals. • The volume adjustment for Traffic Information is automatically memorized. The next time the unit switches to Traffic Information, the volume is set to the memorized level. • To deactivate, touch [TI] again. Changes the settings for radio reception on the screen. p [PTY]*1*2 [SEEK] [S]/[T] (For FM RDS features) Enters PTY search mode. 1 Touch [PTY]. 2 Touch and hold a PTY code to search for. If there is a station broadcasting a program of the same PTY code as you have selected, that station is tuned in. Changes the seek mode for [S]/[T]. • AUTO1 (Initial): Auto search • AUTO2: Tunes in preset stations one after another • MANU: Manual search Searches for a station. • The search method differs according to the selected seek mode (see above). *1 Appears only when FM is selected as the source. *2 Only English/Spanish/French/German/Dutch/Portuguese are available for the text language here. If another language has been selected in (Page 37), the text language is set to English. Presetting stations in the memory You can preset five stations for each band. Automatic presetting - AME (Auto Memory) (for FM only) On the source control screen, touch as follows: (Hold) The local stations with the strongest signals are found and stored automatically. Manual presetting 1 Tune in to a station you want to preset. 2 Select a preset number to store into. 18 ENGLISH (Hold) E.g. Radio source control screen for DDX418BT The station selected in step 1 is stored into the preset number [P1] to [P5] you have selected.